MXM565_465_365N_BRO

3/12

Lower TEC ValueMax. allowable TEC value*256.5%3.5 kWh*36.2 kWhMX-M565N61.9%2.6 kWh*34.2 kWhMX-M465N67.7%2.1 kWh*33.1 kWhMX-M365N40.0 %down12 secondsShorter Warm-Up Time*42Eco FriendlinessThe MX-M565N/M465N/M365N gets its eco edge from advanced environmental technologies incorporated throughout the MFP—from its hardware and electrical system down to its software and supplies. Even its short warm-up time of 12 seconds produces substantial energy savings. The new Mycrostoner-CAP is one of those eco-boosting supplies. The low melting point of this proprietary toner lets it get the job done with less energy than conventional toner requires. And this dramatically reduced power consumption is what gives the MX-M565N/M465N/M365N one of the lowest TEC values*1 in the industry—signicantly lower than even the maximum values allowable under ENERGY STAR®.Productive PerformanceLeading the way to document productivity is a 150-sheet high-speed DSPF (duplex single pass feeder) that gives the MX-M565N/M465N/M365N quick scanning speeds of up to 85 opm for one-sided originals and 170 opm for two-sided originals—in both colour and B/W. For added convenience, an optional 500 + 2,000-sheet paper drawer increases the MX-M565N/M465N/M365N’s total paper capacity to 6,600 sheets. And a variety of nishing options, including a 4,000-sheet A3 saddle stitch nisher, makes for attractive and efcient document nishing. *1 Typical amount of energy consumed in a hypothetical week measured as stipulated under the ENERGY STAR® programme. *2 Maximum TEC value allowable under the latest ENERGY STAR programme (version 2.0).*3 Measured at 230V. TEC values are as follows when measured at 100V (models for the Japanese market): MX-M565FN: 3.3 kWh, MX-M465FN: 2.5 kWh, MX-M365FN: 1.9 kWh*4 Compared to MX-M503N/M453N/M363N (warm-up time 20 seconds).

※このページを正しく表示するにはFlashPlayer10.2以上が必要です