HOMEProductsAutomated Factory SystemsAutomobile related systems



* The valve stroke and cam stroke of a cylinder head assembly with valve lifter and cam shaft are simultaneously measured and the valve clearance is automatically calculated to decide whether it is acceptable or not. At the same time, the cranking torque is also measured.


* The cam stroke and valve stroke can be simultaneously measured from above and below the cylinder head, respectively.
* The probe, a high-precision micron-order linear gauge, is combined with a rigid main unit, assuring high precision and stability in measurement.
* A calculation is made from measurement data for judgment. It is also possible to feed back the calculation result to the valve lifter mounting device for error compensation.


Cycle time
30 sec/unit (8 heads x 1)

2500 (L) x 1500 (W) x 2000 (H) (2 stations IN/EXH)

HOMEProductsAutomated Factory SystemsAutomobile related systems
PreviousTo the top of this page