About Command Injection Security Vulnerability in SHARP Multifunctional Products (MFP)

Command injection security vulnerability was identified and may impact some MFPs that are not properly protected with a strong admin password and firewall. The following is a summary of the vulnerability, affected models, and countermeasures:

Vulnerability identification number JVNVU#96195138 / CVE-2022-45796
Affected models and firmware version See the separate table below.
Condition to enable attacks using this vulnerability

To enable attackers to successfully attack the MFP using this vulnerability, they require access to:

  • ● Target MFP via network within firewall
  • ● MFP administrator password
Possible impacts

If the above conditions are fulfilled, attackers may execute arbitrary command codes on the MFP.
Mitigation measures To mitigate security risks and the command injection vulnerability, ensure to protect your MFPs and apply the following countermeasures.
  • ● Change admin password from factory default and securely store and manage the password.
  • ● Do not expose MFPs directly to the Internet. Connect them via a firewall or similar network appliance.
If the above countermeasures are not practiced, devices may be accessed by attackers and cause data leakage.
Countermeasure Sharp released updated firmware to mitigate the command injection vulnerability. For details, consult your authorized Sharp service providers.
Acknowledgment This vulnerability was reported by ZUSO Advanced Research Team in Taiwan. We truly appreciate their report.
Information JVNVU#96195138 Command Injection vulnerability in SHARP Multifunctional Products (MFP):
https://jvn.jp/en/vu/JVNVU96195138/index.html
CVE: https://www.cve.org/CVERecord?id=CVE-2022-45796

■ Affected models and firmware versions

Category Model name Firmware version affected (see note)
* Check the 2nd to 4th digits of the firmware version
Digital Full-color Multifunctional System BP-70C65/BP-70C55/BP-70C45/
BP-70C36/BP-70C31/
BP-60C45/BP-60C36/BP-60C31/
BP-50C65/BP-50C55/BP-50C45/
BP-50C36/BP-50C31/BP-50C26/
BP-55C26		 “202” or earlier
MX-8081/MX-7081 “120” or earlier
MX-6071/MX-5071/MX-4071/
MX-3571/MX-3071/
MX-4061/MX-3561/MX-3061/
MX-6051/MX-5051/MX-4051/
MX-3551/MX-3051/MX-2651/
MX-6071S/MX-5071S/MX-4071S/
MX-3571S/MX-3071S
MX-4061S/MX-3561S/MX-3061S

“600” or earlier
BP-30C25
BP-30C25Y
BP-30C25Z
BP-30C25T		 “121” or earlier
MX-7580N/MX-6580N “500” or earlier
MX-8090N/MX-7090N “402” or earlier
MX-6070N/MX-5070N/MX-4070N/
MX-3570N/MX-3070N/
MX-4060N/MX-3560N/MX-3060N/
MX-6070V/MX-5070V/MX-4070V/
MX-3570V/MX-3070V/
MX-4060V/MX-3560V/MX-3060V/
MX-6070N A/MX-4070N A/MX-3070N A
MX-6070V A/MX-4070V A/MX-3070V A		 “790” or earlier
MX-6050N/MX-5050N/
MX-4050N/MX-3550N/MX-3050N/
MX-6050V/MX-5050V/
MX-4050V/MX-3550V/MX-3050V/
MX-2630N/
MX-3050N A/
MX-3050V A		 “790” or earlier
MX-C304W/MX-C303W/
MX-C304/MX-C303/
MX-C304WH/MX-C303WH		 “500” or earlier
Digital Multifunctional System (Monochrome) BP-70M90/BP-70M75 “200” or earlier
BP-70M65/BP-70M55/BP-70M45/
BP-70M36/BP-70M31/
BP-50M55/BP-50M50/BP-50M45/
BP-50M36/BP-50M31/BP-50M26		 “211” or earlier
MX-M1206/MX-M1056 “102” or earlier
MX-M7570/MX-M6570 “453” or earlier
MX-M6071/MX-M5071/MX-M4071/
MX-M3571/MX-M3071/
MX-M6051/MX-M5051/MX-M4051/
MX-M3551/MX-M3051/MX-M2651/
MX-M3571S/MX-M3071S/
MX-M6071S/MX-M5071S/MX-M4071S		 “400” or earlier
BP-30M35/BP-30M31/BP-30M28/
BP-30M35T/BP-30M31T/BP-30M28T		 “202” or earlier
MX-B476W/MX-B376W/
MX-B456W/MX-B356W/
MX-B476WH/MX-B376WH/
MX-B456WH/MX-B356WH		 “400” or earlier
MX-M905 “602” or earlier
MX-M6070/MX-M5070/MX-M4070/
MX-M3570/MX-M3070/
MX-M6050/MX-M5050/MX-M4050/
MX-M3550/MX-M3050/
MX-M2630/
MX-M6070 A/MX-M4070 A/MX-M3070 A/
MX-M3050 A/
MX-M2630 A		 “500” or earlier
MX-B455W/MX-B355W/
MX-B455WZ/MX-B355WZ/
MX-B455WT/MX-B355WT		 “401” or earlier

NOTE: Follow the steps to check firmware version of your MFP.
Administrator login is required:

  • ● Select [Settings] icon from the operation panel.
  • If you are accessing the MFP from your PC within the network, you may access the MFP settings via Web browser by entering its IP address.
  • ● Select [Status] tab.
  • Select [Firmware version].
  • ● The 16-digit alphanumeric string after “BUNDLE” (two 8-digit alphanumeric strings connected with an underscore) is the firmware version
  • (e.g., 0510Z200_22040400).