TURNING ON THE POWER
This section describes how to turn on/off the machine's
power and how to restart the machine.
Operate two power switches: the main power switch inside the
front cover, located in the lower left corner, and the [Power] button
on the operation panel.
When a finisher (large stacker) or saddle stitch finisher (large stacker) is installed on the BP-50C55/BP-50C65/BP-70C55/BP-70C65, open the front cover on the finisher (large stacker), or the front upper cover on the saddle stitch finisher (large stacker), before opening the front cover of the machine.
TURNING ON THE POWER
Turn the main power switch
to the "
" position.
When the main power indicator
lights in blue, press the [Power] button.
TURNING OFF THE POWER
After pressing the [Power] button, tap the
[Turn off] key on the touch.
To turn off the power for a long time, press the [Power] button
to turn off the power, and after the screen display on the operation
panel disappears, set the main power switch to the "
" position.
RESTART
THE MACHINE
Press the [Power] button
to turn off the power, and then tap the [Turn off] key on the touch
panel. After that, press the [Power] button again to turn on the
power.
Caution
- When
turning off the main power switch, be sure to press the [Power]
button on the operation panel, tap the [Turn off] key on the touch
panel, and then set the main power switch to the "
" position.
- In a sudden
case of main power outage, turn the power for the machine back on
and then turn it off in the correct order.
If the machine is left for a long time with the main power having
been turned off prior to the [Power] button being turned off, abnormal
noises, degraded image quality or other problems may result.
- Turn off
both the [Power] button and the main power switch and unplug the
power cord if you suspect a machine failure, if there is a bad thunderstorm
nearby, or when you are moving the machine.
- When using the fax or Internet fax
function, always keep the main power switch in the "
" position.
- If the fax function will be used, and in
particular if reception or timer transmission will take place at
night, do not turn the main power off.
- In order for some settings to take effect,
the machine must be restarted. In some states of the machine, restarting
with the [Power] button may not make the settings take effect. In
this case, turn off the main power switch and then turn it on again.
