SHARP

Language

SPECIFYING A BILLING CODE USING THE PRINTER DRIVER

You can enter a billing code using the printer of the machine.
For an overview of a billing code, refer to " BILLING CODE".

ENABLE BILLING CODE

This setting is required only in the Windows environment. (Always usable under macOS environment)

Click the [Start] button, select [Settings] → [Device] → [Devices and Printers].

  • In Windows 11, click the [Start] button, select [Bluetooth & devices] → [Printers & scanners].
  • In Windows 8.1/Windows Server 2012, right-click the [Start] button, select [Control Panel] → [View devices and printers] (or [Devices and Printers]).

Right-click the printer driver icon of the machine and select [Printer Properties].

Specify a billing code

  1. Click the [Configuration] tab.
  2. Click the [Printing Policy] button.
  3. Set the [Billing Code] check box to ,
  4. Click the [OK] button.

Windows

When printing starts, the billing code setting screen appears.
Enter the main code and sub code, and click the [OK] button.
To retain the specified billing code, set [Always Use This Billing Code] to .

  • You can click [Get Billing Code] to get the machine's billing code list and select the billing code from the list.
  • If you have started printing without specifying a billing code, a use code is recorded in the job log.

macOS

  1. Select [Billing Code].
  2. Enter the main code and sub code.
Language

Version 04a / bp70c65_usr_04a_en

↑Top of page