SHARP

Language

FAX TRANSMISSION SEQUENCE

This section explains the basic steps for sending a fax.

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS

Enter the destination fax number.

Tap the numeric keys to enter the destination number directly, or search and retrieve the address book or number.
In Normal mode

Configure the settings.

Specify the original scan size, exposure, resolution, etc.
If necessary, you can refer to the following functions for the setting.
In Normal mode
In Easy mode

Send the original.

Tap the [Start] key.
  • To check a preview of a scanned image, tap the [Preview] key before tapping the [Start] key.
  • When the original is placed on the document glass:
    • When sending a fax normally (memory transmission)
    • Repeat the steps for placing and scanning the originals the same number of times as there are originals. After scanning all originals, tap the [Read-End] key.
    • When sending a fax in direct transmission mode
    • Multi-page originals cannot be scanned in direct transmission mode. Tap the [Start] key to start transmission.
  • In normal mode, if you tap [File] or [Quick File] on the action panel before starting fax transmission, you can save the scanned original as data.
  • QUICK FILE
    FILE
Language

Version 04a / bp70c65_usr_04a_us

↑Top of page