SHARP

Language

DIRECTLY PRINTING A FILE IN USB MEMORY

Files in a USB memory device connected to the machine are printed from the operation panel of the machine without using the printer driver.
When the printer driver of the machine is not installed on your PC, you can copy a file into a commercially available USB memory device and connect the device to the machine to print the file directly.

  • Use FAT32, NTFS or exFAT format for USB memory device.
  • When the format of the USB memory device is FAT32, use a 32 GB or less USB memory device.
When you select a PDF file that has a password, enter the password in the job status screen to begin printing.
PRINTING AN ENCRYPTED PDF FILE

Connect the USB memory device to the machine.

When the screen for selecting the action appears, tap [Print from external memory device (USB)].

If the screen does not appear, follow the steps below.
  1. Tap the [File Retrieve] key.
  2. Tap the [Select File from USB Memory to Print] key on the action panel.

Tap the key of the file that you wish to print, and tap the [Change Setting to Print] key on the action panel.

  • When printing multiple files, tap the keys of the files you wish to print, and tap the [Print] key on the action panel.
  • The icon appears to the left of keys of files that can be printed.
  • The icon is displayed to the left of keys of folders in the USB memory device. To display a folder or a file in a folder, tap this key.
  • A total of 500 keys of files and folders can be displayed.
  • Tap to move up one folder level.
  • When you move down a folder level by tapping a folder key, appears. Tap this key to return to the file or folder name selection screen.
  • Tap to switch to thumbnails.
  • Tap the [File or Folder Name] key to change the order of the files and folders displayed on the screen. Each time the key is tapped, the order changes between ascending and descending.

Select the print conditions.

  • If you have selected multiple files in step 3, you can select only the number of prints.
  • If you selected a PS or PCL file that includes print conditions in step 3, the print conditions in the file will be given priority.

Tap the [Start] key.

Printing begins after the selected file is transferred.

Remove the USB memory device from the machine.

Language

Version 03a / bp70m65_usr_03a_en

↑Top of page