SHARP

Language

ORIGINAL SIZE

TRANSMITTABLE ORIGINAL SIZES

For information on the original sizes that can be loaded, see " AUTOMATIC DOCUMENT FEEDER" and " DOCUMENT GLASS".

THE SIZE OF THE PLACED ORIGINAL

When a standard size original is placed, the original size is automatically detected and displayed in "Scan Size" on the based screen.
SCAN SIZE AND SEND SIZE (ENLARGE/REDUCE)
Standard sizes are sizes that the machine can automatically detect. The standard sizes are set in "Original Size Detector Setting" in "Settings".

When the automatic original detection function is operating and the original (of inch or non-standard size) is placed, the closest standard size may be displayed or the original size may not appear. In this event, manually set the correct original size.
SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE
SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES
To specify the size that the machine can automatically detect:
Select the group of detected original sizes by selecting [System Settings] in "Settings (administrator)” → [Common Settings] → [Device Control] → [Condition Settings] → [Original Size Detector Setting].

List of original size detector settings

DETECTABLE ORIGINAL SIZES

Language

Version 03a / bp70m65_usr_03a_en

↑Top of page