SHARP

Language

SCANNING AND SENDING AN ORIGINAL AS SEPARATE PAGES

SCANNING AN ORIGINAL AS TWO SEPARATE PAGES (DUAL PAGE SCAN)

The left and right sides of an original are scanned as two separate pages. This function is useful when you wish to successively scan each page of a book or other bound document.
When using dual page scan, the original must be placed on the document glass.

Original scan size Transmitted image
A3 (11" x 17") x 1 page

A4 (8-1/2" x 11") x 2 pages

  • This function is available when the original size setting is set to [Auto].
  • Note that "Centre Erase" and "Edge+Centre Erase" cannot be used.

Place the original on the document glass.

DOCUMENT GLASS

Tap the mode display to switch to the initial screen of each mode.

CHANGING MODES

Specify the destination.

RETRIEVING A DESTINATION FROM AN ADDRESS BOOK
VIEWING A LIST OF THE SELECTED DESTINATIONS
USING A SEARCH NUMBER TO RETRIEVE A DESTINATION
ENTERING AN ADDRESS MANUALLY
SPECIFYING A NETWORK FOLDER
RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK
RETRIEVING A DESTINATION FROM A MOBILE ADDRESS BOOK
USING A TRANSMISSION LOG TO RESEND
When in fax mode, enter the destination number.
ENTERING A DESTINATION NUMBER USING THE NUMERIC KEYS
RETRIEVING A DESTINATION FROM AN ADDRESS BOOK
USING A SEARCH NUMBER TO RETRIEVE A DESTINATION
RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK
RETRIEVING A DESTINATION FROM A MOBILE ADDRESS BOOK
USING A TRANSMISSION LOG TO RESEND

Tap the [Others] key, and tap the [Dual Page Scan] key.

A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
To cancel the dual page scan setting
Tap the [Dual Page Scan] key to uncheck it.

Tap the [Start] key to start scanning of the original.

When scanning finishes, place the next original and tap the [Start] key.
Repeat until all pages have been scanned and then tap the [Read-End] key.
A beep will sound to indicate that transmission has ended.

SPLITTING A PAMPHLET BY PAGE AND TRANSMITTING THE PAGES SUCCESSIVELY (BOOK DIVIDE)

The opened pages of a saddle-stitch pamphlet are split by page according to actual page order before transmission.
When using this function, you do not need to sort the original pages to be sent.

This function can be enabled when the original size setting is set to [Auto].
  • The document glass is not available for this function.
  • Book Divide is not possible when "Settings (administrator)" - [System Settings] → [Common Settings] → [Device Control] → [Condition Settings] or [Enable/Disable Settings] → [Disabling of Document Feeder] is enabled.
  • Place the original in the document feeder tray of the automatic document feeder.

    When in fax mode, then after completing this procedure, proceed to Step 3.
    AUTOMATIC DOCUMENT FEEDER

    Tap the mode display to switch to the initial screen of each mode.

    CHANGING MODES

    Specify the destination.

    RETRIEVING A DESTINATION FROM AN ADDRESS BOOK
    VIEWING A LIST OF THE SELECTED DESTINATIONS
    USING A SEARCH NUMBER TO RETRIEVE A DESTINATION
    ENTERING AN ADDRESS MANUALLY
    SPECIFYING A NETWORK FOLDER
    RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK
    RETRIEVING A DESTINATION FROM A MOBILE ADDRESS BOOK
    USING A TRANSMISSION LOG TO RESEND
    When in fax mode, enter the destination number.
    ENTERING A DESTINATION NUMBER USING THE NUMERIC KEYS
    RETRIEVING A DESTINATION FROM AN ADDRESS BOOK
    USING A SEARCH NUMBER TO RETRIEVE A DESTINATION
    RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK
    RETRIEVING A DESTINATION FROM A MOBILE ADDRESS BOOK
    USING A TRANSMISSION LOG TO RESEND

    Tap the [Others] key, and tap the [Book Divide] key.

    Select the binding edge of the pamphlet original.

    After the settings are completed, tap and [Back] keys in sequence.
    Check the preview image displayed in the screen, and make sure that the binding edge is correct.
    To cancel the Book Divide setting:
    Tap the [Off] key.

    Tap the [Start] key to start scanning of the original.

    A beep will sound to indicate that scanning and transmission have ended.
    Language

    Version 03a / bp70m65_usr_03a_en

    ↑Top of page