This section describes the steps for setting the original
on the document glass.
Warning
Allowed original sizes
Minimum original size | Maximum original size |
---|---|
Standard size (Minimum size that can be automatically detected) A5: 210 mm (longitudinal) × 148 mm (transversal) 8-1/2" (longitudinal) × 5-1/2" (transversal) Non-standard size (Minimum size that can be specified manually) 25 mm (longitudinal) x 25 mm (transversal) 1" (longitudinal) x 1" (transversal) |
Standard size (Maximum size that can be automatically detected) A3: 297 mm (longitudinal) x 420 mm (transversal) 11" (longitudinal) x 17" (transversal) Non-standard size (Maximum size that can be specified manually) 297 mm (longitudinal) x 432 mm (transversal) 11-5/8" (longitudinal) x 17" (transversal) |
Open the automatic document feeder.
Load the paper with the print side facing down.
Place the original face down and align the top left corner of the original with back left (at the tip of the markCaution
Do not place any objects under the original size detector.Close the automatic document feeder.
After placing the original, close the automatic document feeder. If the unit is left open, parts outside of the original will be copied in black, causing excessive use of toner.Version 02a / bp70m90_usr_02a_en