SHARP

Language

TOUCH TYPES

OPERATION TYPES

In addition to tapping, equivalent to conventional touching, the touch panel of the machine can be operated by long touching, flicking and sliding.

Tapping

Touch the panel with your finger and then lift it quickly. Use this method to select a key, tab or check box.

Sliding

Slide the scroll bar (with your finger touching the panel) to scroll up and down a list with a large number of items.

Long touching

Touch the panel with your finger and hold it for a while.

Keep holding (long touching) it on the action panel or characters in the text box to display characters in a balloon.

Double tapping

Touch the screen twice. Use this operation to enlarge the image in the preview.

Flicking

Flick the panel to scroll a preview image quickly.

Pinch

Touch the screen with two fingers and move them toward each other. This is used to reduce the browser and preview display.

Dragging

Drag (slide your finger touching the panel in a random direction) to replace a page in the original during preview.

Spread

Touch the screen with two fingers and move them away from each other. This is used to enlarge the browser and preview display.

Operation on respective screens

Key (tapping)

A. Tap to select an item. The selected key turns into a different colour.
B. Tap numeric keys to enter numbers.
C. Tap to increase or decrease the value. Long touching causes the value to be increased or decreased until you stop touching.
D. Tap to enter a checkmark and enable the setting.
E. Tap here to close the screen

List (tapping, sliding and flicking)

A. Tap to select an item. The selected item turns into a different colour.
B. Slide the bar up and down. It appears when the item does not fit in the screen.
C. Flick the key upwards or downwards. The item scrolls up or down.

Slider (sliding)

A. Slide the knob from side to side.

Tab (tapping)

A. Tap a tab to switch what is displayed.

Preview screen (Double tapping/ Pinch/ Spread)

A. When a preview screen is "pinched", the screen image is reduced. When "spread", the image is enlarged. When "Double tapping", the image is also enlarged.

OPERATION OF FREQUENTLY USED KEYS

Numeric keys

Tap a number to enter it.
To clear the entered number, tap the [C] key

On the address screen, you can enter characters other than numbers, and a different key layout is provided. You can also move the cursor by using the [←] and [→] keys. Tap the [C] key to delete one character to the left of the cursor.

[Start] key

Tap to perform a print or send job.

In easy scan mode, [B/W Start] and [Colour Start] keys are displayed.

[Cancel Copy] key, [Storing Cancelled] key, [Cancel Scan] key, [Sending Cancelled] key

Tap to stop copying, printing, or transmission.

[CA] key

Tap to cancel all settings and restore the initial status in each mode.

Language

Version 03a / bp70m90_usr_03a_en

↑Top of page