Digital multifunctional system BP-70M75 / BP-70M90

The size of the placed original is displayed in the upper left corner of the screen.
When you place the original in the automatic document feeder, the original icon appears next to the original size.

Check the size of the placed original on the display of the [Original] key.
If the original size is set to [Auto], the automatically detected size (standard size) is displayed. If the original size is specified manually, the specified original size is displayed.
When you place the original in the automatic document feeder, the original icon appears above the automatic document feeder.

Standard sizes
Standard sizes are sizes that the machine can automatically detect.
For standard sizes that can be detected, refer to DETECTABLE ORIGINAL SIZES.

Even when [Original] is set to [Auto], some original sizes may be detected as other one that is near the standard size.

SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL

When placing a non-standard size original on the document glass, you can make it easier for the size to be detected by placing a blank sheet of A4 (8-1/2" x 11"), B5 (5-1/2" x 8-1/2"), or other standard size of paper on top of the original.

Place the original as shown below.
If you place the original in an incorrect orientation, it may result in punching at an unexpected position or stapling.
On "Preview Screen", view the image orientation or preview image.
PREVIEW SCREEN

Document glass
Document feeder tray

Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.
For information on the orientation of the original, see "SPECIFYING THE ORIENTATION OF THE ORIGINAL".

If the orientation is different between the original and paper, the original image will be automatically rotated 90 degrees to match the paper.

CHECKING THE ORIGINAL SIZE

EASY MODE

NORMAL MODE

ORIENTATION OF PLACED ORIGINAL

AUTOMATIC COPY IMAGE ROTATION (ROTATION COPY)

CONTENTS MENU