A usual transmission job moves to the job list when
transmission is completed. Then the status field displays "Send OK". However,
Internet Fax jobs such as reception, timer transmission, retries,
and forwarding are displayed in the job status screen as follows:
Reception
job
During Internet Fax receiving, the status field displays "Receiving"
in the job queue list. When reception is completed, the job moves
to the completed job list and the status field displays "In Memory".
After Internet Fax printing is completed, the status changes to
"Received".
Timer
transmission jobs
A timer transmission job appears at the end of the job queue
list until the specified time is reached.
Transmission begins at the specified time. When transmission is
completed, the job moves to the completed job list and the status
field displays "Send OK".
Internet
Fax transmission job with reception report request specified
An Internet Fax transmission job with a reception report request
specified, excluding a direct SMTP transmission job, is placed into
the standby state at the bottom of the Job Queue screen after a
transmission has been completed. "Report Wait" appears in the status
field.
The screen changes to the completion screen when a reception
report e-mail has been received from the destination.
Reception
jobs when the inbound routing settings are enabled
When the inbound routing settings are enabled, reception jobs
are handled as follows depending on the print setting.
FORWARDING RECEIVED DATA TO PRESET DESTINATIONS (INBOUND ROUTING
SETTINGS)
Received
data is not printed
When a data is being received, "Receiving" appears in the
job queue list. When the reception is completed, the status changes
to "Waiting".
Received
Internet fax is printed
When reception is completed, the status field displays "In Memory"
in the completed job list. After the fax is printed, the status
changes to "Received". Then a job is added for which the status
field displays "Waiting" in the job queue list. When forwarding
the received fax is completed, the field changes to "Forward OK".
Version 03a / bp70m90_usr_03a_