SELECTING THE PAPER TRAY FOR COPYING

The machine is set to automatically select a tray that has the same size of paper as the size of the placed original (Auto Paper Select).
When you want to change the paper size for copying, you can select the paper tray manually.

If the selected tray runs out of paper during a copy job and there is another tray that has the same size and type of paper, that tray will be automatically selected and the copy job will continue.
If a suitable size of copy paper is not loaded, copying may stop.

Tap the [Paper Select] key.

BASIC PROCEDURE FOR MAKING COPIES

Tap the required tray key.

After the settings are completed, tap [OK] key.
In Easy mode

In Normal mode

When the bypass tray is selected, specify the paper type and size based on the paper loaded into the bypass tray.

SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON BYPASS TRAY

In normal mode, you can also open the [Paper Select] screen by tapping the machine image on the base screen.

To automatically select the tray, tap the [Auto] key.

SELECTING THE PAPER TRAY FOR COPYING

CONTENTS MENU