SHARP

Language

STORING FREQUENTLY USED ORIGINAL SIZES

Store the frequently used non-standard original sizes. This section explains how to store, retrieve, change, and delete non-standard original sizes.

  • The stored original size will be retained even if the main power is turned off.
  • The stored original size will be retained even if the power is turned off.
  • A total of up to 12 non-standard original sizes can be registered for copying, fax, and image sending.
  • The added original sizes will also appear in other modes.
  • You can register, modify, and delete the original size only in Normal mode.

STORING ORIGINAL SIZES (AMEND/DELETE)

Tap the [Detail] key to change to normal mode.

EASY MODE

Tap the [Original] key.

Tap the [Custom Size] tab.

Tap [Store/Delete Original Size] on the action panel.

Tap a key ( ) for storing a custom original size.

Tap a key that does not show a size.
To amend or delete a previously stored key:
Tap the key that you want to amend or delete. The following screen will appear.
  • To amend the key, tap the [Amend] key and go to the next step.
  • To delete the key, tap the [Delete] key. Make sure that the original size has been cleared and tap the [OK] key.

Specify the original size.

Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
It is convenient to use to finely adjust the entered size.

Tap the [OK] key.

After the settings are completed, tap the key, and check that the key of the size stored on the original screen is added properly. After you have checked it, tap [OK].
To cancel the operation:
Tap the [CA] key.

Retrieving a stored original size

Perform steps 1 to 2 in SPECIFY THE ORIENTATION AND SIZE OF THE ORIGINAL.

Tap the [Custom Size] key.

Tap the key of the original size that you wish to retrieve.

After selecting the key of the original size, tap the [OK] key.
To cancel the operation
Tap the [CA] key.

Tap the [OK] key.

Make sure that the original size you have set is displayed in the upper left corner of the screen.

CONTENTS MENU

Language

Version 03a / bpb547wd_usr_03a_en

↑Top of page