SHARP

Language

CONNECTING AND USING A MOBILE DEVICE WITH THIS MACHINE

You can easily connect the machine to a smartphone or other NFC compatible mobile device.

  • Touch the NFC touch pointarea in the lower right corner of the operation panel.
By installing the dedicated application in the mobile device in advance, the application will start automatically after the device connects to the machine, allowing you to print immediately.
You can also connect by displaying a QR code on the machine's touch panel and scanning the code with a mobile device that has a dedicated application installed.

  • Make sure that the mobile device’s Wi-Fi function and NFC function are turned on in advance.
  • For NFC card readers and dedicated applications that can be used, consult your dealer or nearest authorised service representative.

CONNECTING BY NFC

You can easily connect a mobile device to the machine by holding it to the NFC touch point area.
In addition, by installing the dedicated application on your mobile device, the application will automatically start when the device connects to the machine, allowing you to send data and print to the machine right away.
Configure settings on the machine in advance to enable use of an NFC and wireless LAN.

This function may not support depending on the Android version of your device.

Hold your mobile device to the NFC touch point area

If the machine is in the auto power shut-off state, holding your mobile device to the NFC touch point area will wake the machine. However, if [Sleep Mode] is set to [Energy Saving Priority], you must wake the machine manually.

Connecting to the Machine from a Mobile Device

The machine and mobile device automatically start the connection.
If the dedicated application is not installed, your mobile device will automatically connect to the Google PlayTM site and download the dedicated application.
If the dedicated application is installed on your mobile device, it will start.
You can print and scan from the application.
If the connection is not successful, try the following:
  • Move the mobile device slowly over the NFC touch point area.
  • If a case is attached to the mobile device, remove the case.

CONNECTING BY QR CODE

PRINTING AND SCANNING USING A MOBILE DEVICE

Language

BP-50C26/BP-50C31/BP-50C36/BP-50C45/BP-50C55/BP-50C65/BP-55C26/BP-60C31/BP-60C36/BP-60C45/BP-70C31/BP-70C36/BP-70C45/BP-70C55/BP-70C65
User's Manual

Version 05a / bp70c65_usr_05a_en