Various devices mounted on the machine can be set.
If the printed colors shift out of position when
you print by Color printing, you can adjust the print position
of each color to reduce color shifting.
Tap the [Execute] key.
Use this function to clean the machine's fusing unit
when dots or other dirt appear on the printed side of the paper.
When this function is executed, "V" printed paper is output and
the fusing unit is cleaned.
Adjust black text and the width of black lines.
After using this function to perform adjustment, perform [System
Settings] - [Common Functions] - [Auto Color Calibration (for
Copy)], [Auto Color Calibration (for Print)].
Specify to use the dark streak reduction or
not.
The dark streak reduction can be used for Scan Original, Copy,
Image Send, and Scan to local drive functions.
If the dark streak reduction is enabled, select any of the
following options.
Treat Thin Dark Streaks: Use this setting to make thin dark
streaks less apparent. (Low level)
Normal: Use this setting to make dark streaks less apparent.
(Medium level)
Treat Up to Thick Dark Streaks: Use this setting to make thick
dark streaks less apparent. (High level)
Set this option to display a warning message
when dark streaks are detected by the document feeder.
You can easily perform copy quality adjustment
in the default state.
You can change the default setting ([2]) to [1 (Smooth)] or
[3 (Sharp)].
You can adjust the default color, gradation,
and density of color copies and black & white copies.
The density of each color is divided into 3 ranges, and
you can adjust the level of each.
Adjust the proportion of the black component
in copy quality settings.
Set this for auto, text / printed photo, text, printed photo,
photo-paper photo, text / photo-paper photo, map, and faint original
in the original type settings, and for text / printed photo, text,
and printed photo when the original is a copy.
Configure settings for color copying and
black & white copying when [Auto] is selected for the copy exposure.
The exposure can be adjusted separately for copying using the document
glass and copying using the auto document feeder.
You can make copy images in the default state
sharper or softer.
Specify image quality priority. Set this for
the auto copy exposure and text / printed photo settings.
Perform quick adjustment of print quality.
You can change the default setting ([2]) to [1 (Smooth)] or
[3 (Sharp)].
This setting can be set separately for color mode and
monochrome mode.
You can adjust the tone and density of color in color printing
and black & white printing. You can adjust the default color, gradation,
and density of color copies and black & white copies.
The density of each color is divided into 3 ranges, and
you can adjust the level of each.
Set the density of color printing and
of black & white printing.
When color lines do not print correctly
in special applications such as CAD, you can make lines thicker.
Set the color tone (RGB) for scanning.
Use this setting to obtain a sharp image when
scanning an original.
You can adjust the contrast of scanned images.
Set color profiles used for printing.
This shows the currently set profile name.
Save the current color profile on the computer.
Select the updated color profile and click the
[Store] key.
This shows the currently set profile name.
Save the current color profile on the computer.
Select the updated color profile and click the
[Store] key.
This shows the currently set profile name.
Save the current color profile on the computer.
Select the updated color profile and click the
[Store] key.
Performs automatic color correction when the color is
off.
For copying, adjust with [Auto Color Calibration (for
Copy)]. For printing, adjust with [Auto Color Calibration (for
Print)]. You can use [Copy Calibration by Screen] and [Printer Calibration
by Screen] to perform even higher precision adjustment of each mode.
The machine prints a test patch, the test patch is scanned,
and the color is automatically corrected.
After the [Execute] key is tapped and a test patch is printed,
a message appears prompting you to begin automatic calibration.
Follow the instructions in the message to perform color adjustment.
If uneven density occurs in a copy and others,
use this function to smooth the density.
The uneven density is automatically corrected by scanning
a test patch that you print.
After the [Execute] key is tapped and a test patch is printed,
a message appears prompting you to begin automatic calibration.
Follow the instructions in the message to perform density smoothing.
If there are no problems after adjustment, perform "Auto Color Calibration
(for Copy)" and "Auto Color Calibration (for Print)".
To return the adjusted values to their factory default state,
tap [Return Density Smoothing Adjustment Value to Defaults]. If
you tapped [Return to the Defaults], perform adjustment of the density
that you want to readjust (medium density in the default mode).
Normally toner cartridges cannot be removed. However,
when a cartridge runs out of toner, the cartridge is automatically
ejected to allow removal. If you need to remove a cartridge that
still has toner, you can manually eject and remove the cartridge.
Select the toner cartridge to be ejected and tap the [Execute] key.
The selected cartridge is ejected to allow removal.
Version 03a / bp70c65_usr_03a_us
