This section explains settings that must be configured
before you can use the Print Release function.
To use the print release
function, configure in setting mode (administrator).
If the machine is used in a DHCP environment, the IP
address of the machine may change. If this happens, you will not be
able to send print release information to the machine.
It is not necessary this setting, if already added the
print release icon.
Tap [Edit Home] on the action panel.
Tap a place without a shortcut key in home edit mode.
Tap [Print Release].
Tap the [Edit End] key.
Home Edit Mode is exited and you return to the home screen.Install the printer driver of the primary
unit on your computer. For the procedures for installing the printer
driver, see the Software Setup Guide.
Version 03a / bp70m65_usr_03a_us
