SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL
When the original size is a non-standard size or is
not detected correctly, manually specify the original size.
Set the orientation of the image to ensure that the orientation
of the placed original is correctly recognized.
Set the orientation and size of the original before
scanning the original
SPECIFYING THE ORIENTATION OF THE ORIGINAL
By specifying the starting
side (top or left side) of the placed original, the orientation
of the original will be correctly recognized.
Finishing position settings and N-Up layout settings are specified
using the recognized orientation.
In Easy mode
In Normal mode
SPECIFY THE ORIENTATION AND SIZE OF
THE ORIGINAL
Tap the [Original] key to set the orientation of the
original.
COPY MODETap the [Auto] key.
Tap the appropriate original size key.
After the settings are completed, tap [OK] key.
SPECIFYING THE ORIENTATION AND SIZE
OF A NON-STANDARD SIZE ORIGINALS
Tap the [Original] key to set the orientation of the
original.
COPY MODETap the [Auto] key.
Tap the [Direct Entry] key.
Specify the original size.
After the settings are completed, tap [OK] key.
- Tap
the areas displaying width and height sizes respectively, and enter
the sizes using the numeric keys.
- It is convenient to use
to finely adjust the entered size.
Tap the [OK] key.
Make sure that the original size you have set is displayed
in the upper left corner of the screen.