EDITING THE HOME SCREEN

Open the action panel on the home screen, and tap [Edit Home].

The administrator password screen appears. Enter your password.

Enter the administrator password.

Tap an empty shortcut key location.

Tap the function you want to add.

The shortcut key will be added to the selected location.

After completing the settings, tap the [Logout] key.

Enter the IP address set in the machine in the address bar of your web browser.

In the factory default state, you must enter your user password after entering the IP address.

On the Web page, click the [System Settings] tab → [Home Screen Settings].

Some settings may require that you enter your user password after clicking [Home Screen Settings]. If you did not perform user authentication, you must enter the administrator password.

Select the function you want to add.

To change the name of a shortcut key, select [Custom] in [Key Name] and enter the desired name in the text box.
To change the image of a shortcut key, go to the next step. If you are not changing the image, go to step 5.

To change the image of a shortcut key, set the [Use Custom Image] checkbox to, and select a previously added image with [Select File].

To save an image, see " ADDING A SHORTCUT KEY IMAGE".

When you have finished configuring the settings, click the [Submit] button.

The settings are saved in the machine and applied.
When you have finished settings, click the [Logout] button and close your Web browser.

Open the action panel on the home screen, and tap [Edit Home].

The administrator password screen appears. Enter your password.

Enter the administrator password.

Tap the shortcut key you want to delete, and tap [Delete Key].

A yellow frame appears around the selected shortcut key. With the shortcut key selected, tap
You can also delete by dragging the shortcut key to .

Tap the [Yes] key.

The selected shortcut key will be deleted.

After completing the settings, tap the [Logout] key.

Enter the IP address set in the machine in the address bar of your web browser.

In the factory default state, you must enter your user password after entering the IP address.

On the Web page, click the [System Settings] tab → [Home Screen Settings].

Some settings may require that you enter your user password after clicking [Home Screen Settings]. If you did not perform user authentication, you must enter the administrator password.

Click [Condition Settings] and click the shortcut key you want to delete.

Select [None] and click the [Submit] button.

When you click the [Submit] button, the [Home Screen Registration] screen closes.

When you have finished configuring the settings, click the [Submit] button.

The settings are saved in the machine and applied.
When you have finished settings, click the [Logout] button and close your Web browser.

Open the action panel on the home screen, and tap [Edit Home].

The administrator password screen appears. Enter your password.

Enter the administrator password.

A yellow frame appears around the selected shortcut key.

A yellow frame appears around the selected shortcut key.

Enter the new name by keyboard.

Enter the name, and tap the [OK] key.

After completing the settings, tap the [Logout] key.

Enter the IP address set in the machine in the address bar of your web browser.

In the factory default state, you must enter your user password after entering the IP address.

On the Web page, click the [System Settings] tab → [Home Screen Settings].

Some settings may require that you enter your user password after clicking [Home Screen Settings]. If you did not perform user authentication, you must enter the administrator password.

Click [Condition Settings], and click the shortcut key you want to change.

Select the desired function.

To change the name of a shortcut key, select [Custom] in [Key Name] and enter the desired name in the text box.
To change the image of a shortcut key, go to the next step. If you are not changing the image, go to step 5.

To change the icon image, set the [Use Custom Image] checkbox to , and select a previously added image with [Select File].

To save an image, see " ADDING A SHORTCUT KEY IMAGE"

When you have finished configuring the settings, click the [Submit] button.

The settings are saved in the machine and applied.
When you have finished settings, click the [Logout] button and close your Web browser.

Enter the IP address set in the machine in the address bar of your web browser.

In the factory default state, you must enter your user password after entering the IP address.

On the Web page, click the [System Settings] tab → [Home Screen Settings].

Some settings may require that you enter your user password after clicking [Home Screen Settings]. If you did not perform user authentication, you must enter the administrator password.

Click [Icon].

Select any item

If you are adding a new image, click "Not Set". If "Not Set" items are all in use, click an unneeded item in the already added items.

Select the file to be added in "Select File".

Click the [Browse] button, and select the image to be submitted.

When you have finished configuring the settings, click the [Submit] button.

The settings are saved in the machine and applied.
When you have finished settings, click the [Logout] button and close your Web browser.

Open the action panel on the home screen, and tap [Edit Home].

The administrator password screen appears. Enter your password.

Enter the administrator password.

Tap the shortcut key you want to move, and tap [Move Key].

A yellow frame appears around the selected shortcut key.

Tap an empty shortcut key location

The shortcut key moves to the tapped location.
The shortcut key will not move if you tap a location that already has a shortcut key.

After completing the settings, tap the [Logout] key.

Open the action panel on the home screen, and tap [Edit Home].

The administrator password screen appears. Enter your password.

Enter the administrator password.
Tap [Return Layout to Factory Default] on the action panel.

Tap the [Reset] key.

The shortcut keys are returned to the factory default state.

After completing the settings, tap the [Logout] key.

Enter the IP address set in the machine in the address bar of your web browser.

In the factory default state, you must enter your user password after entering the IP address.

On the Web page, click the [System Settings] tab → [Home Screen Settings].

Some settings may require that you enter your user password after clicking [Home Screen Settings]. If you did not perform user authentication, you must enter the administrator password.

Click [Condition Settings], and click the [Return to the Defaults] button.

A confirmation window appears. Click the [OK] button.

When you have finished configuring the settings, click the [Submit] button.

The settings are saved in the machine and applied.
When you have finished settings, click the [Logout] button and close your Web browser.

Open the action panel on the home screen, and tap [Key Transparency Setting].

The administrator password screen appears. Enter your password.

Enter the administrator password.

Select the level of transparency you wish to set.

Tap the [Finish and Return] key.

After completing the settings, tap the [Logout] key.

Enter the IP address set in the machine in the address bar of your web browser.

In the factory default state, you must enter your user password after entering the IP address.

On the Web page, click the [System Settings] tab → [Home Screen Settings].

Some settings may require that you enter your user password after clicking [Home Screen Settings]. If you did not perform user authentication, you must enter the administrator password.

Click [Condition Settings], and click the [Key Transparency Setting] button.

When you have finished configuring the settings, click the [Submit] button.

The settings are saved in the machine and applied.
When you have finished settings, click the [Logout] button and close your Web browser.

Enter the IP address set in the machine in the address bar of your web browser.

In the factory default state, you must enter your user password after entering the IP address.

On the Web page, click the [System Settings] tab → [Home Screen Settings].

Some settings may require that you enter your user password after clicking [Home Screen Settings]. If you did not perform user authentication, you must enter the administrator password.

Click [Condition Settings] and select the desired layout pattern from the "Template".

When you have finished configuring the settings, click the [Submit] button.

The settings are saved in the machine and applied.

Open the action panel on the home screen, and tap [MFP Display Pattern Setting].

The administrator password screen appears. Enter your password.

Enter the administrator password.

Select the desired pattern.

After settings are completed, tap the [Logout] key.

Open the action panel on the home screen, and tap [Change Text Colour On Home Screen].

The administrator password screen appears. Enter your password.

Enter the administrator password.

Change the text colour.

After settings are completed, tap the [Logout] key.

Connect the USB device containing the desired image to the machine.

When the USB device is connected to the machine, the popup window will be appeared. Tap the [OK] key.

Tap the [Settings] key on the Home screen.

The screen changes to the settings screen.

Tap [System Settings] → [Home Screen Settings] → [Background Image], and then tap [Change] key.

The "Register Background Image" screen will be appeared.

Set the [Use Custom Image] checkbox to , and select the desired image with [Folder Name/File Name].

Click the [Store] button.

After all U/I customize settings are completed, tap the [Logout] key.

Enter the IP address set in the machine in the address bar of your web browser.

In the factory default state, you must enter your user password after entering the IP address.

On the Web page, click the [System Settings] tab → [Home Screen Settings].

Some settings may require that you enter your user password after clicking [Home Screen Settings]. If you did not perform user authentication, you must enter the administrator password.

Click the [Change] button in [Background Image].

Set the [Use Custom Image] checkbox to , and select the image with [Select File].

Click [Browse] to select the image.

When you have finished configuring the settings, click the [Submit] button.

The settings are saved in the machine and applied.
When you have finished settings, click the [Logout] button and close your Web browser.

Enter the IP address set in the machine in the address bar of your web browser.

In the factory default state, you must enter your user password after entering the IP address.

On the Web page, click the [System Settings] tab → [Home Screen Settings].

Some settings may require that you enter your user password after clicking [Home Screen Settings]. If you did not perform user authentication, you must enter the administrator password.

Click [Condition Settings], and click the desired item under "Fix Key".

You can click [Not Set] to add a new fixed key.

Select the function you want to add, and click the [Submit] button.

When you click the [Submit] button, the [Home Screen Registration] screen closes.

When you have finished configuring the settings, click the [Submit] button.

The settings are saved in the machine and applied.
When you have finished settings, click the [Logout] button and close your Web browser.

Tap the [Enlarge Display Mode] key in the home screen.

The key image changes to and enlarge display mode is enabled.
To cancel enlarge display mode, tap the [Enlarge Display Mode] key again. The key image changes to and enlarge display mode is cancelled.

Tap the [Language Setting] key on the home screen.

Select the desired language and tap .

The display changes to the selected language.

Enter the IP address set in the machine in the address bar of your web browser.

In the factory default state, you must enter your user password after entering the IP address.

On the Web page, click the [System Settings] tab → [Common Settings]→ [Operation Settings]→ [Condition Settings]→ [Language Setting].

This settings may require that you enter your user password. If you did not perform user authentication, you must enter the administrator password.

Select the language you want to change from the list.

When you have finished configuring the settings, click the [Submit] button.

The settings are saved in the machine and applied.
When you have finished settings, click the [Logout] button and close your Web browser.

Tap the [Settings] key on the Home screen.

The screen changes to the settings screen.

Tap [System Settings] → [Home Screen Settings] and then tap [Home Button Position] key.

Select [Left] or [Right]

Click the [Store] button.

After settings are completed, tap the [Logout] key.

Enter the IP address set in the machine in the address bar of your web browser.

In the factory default state, you must enter your user password after entering the IP address.

On the Web page, click the [System Settings] tab → [Home Screen Settings] → [Home Button Position].

Some settings may require that you enter your user password after clicking [Home Screen Settings]. If you did not perform user authentication, you must enter the administrator password.

Select [Left] or [Right]

When you have finished configuring the settings, click the [Submit] button.

The settings are saved in the machine and applied.
When you have finished settings, click the [Logout] button and close your Web browser.