SHARP

Language

USING THE PRINT RELEASE FUNCTION

This section explains how to store jobs in the primary unit, and how to select and print jobs from a secondary unit.

STORING A JOB IN THE PRIMARY UNIT FROM YOUR COMPUTER

When user authentication enabled in the machine, you must enter your user information (login name, password, etc.) in the settings screen of the printer driver in order to print. * For explanations of the settings, see “PRINTER FUNCTION".

Check the paper size and paper type used for printing.
Select a paper size and paper type that are supported by the machine to be used.
If you select a non-supported paper size or paper type, you may not be able to print.

In a Windows environment

Open the printer driver properties window.

  1. Select the printer driver of the Primary Unit.
  2. Click the [Preferences] button.

Configure the print release function.

  1. Click the [Job Handling] tab.
  2. Select the [Print Release] checkbox .
  3. Enter user information as needed.
  • The print release function cannot be used at the same time as the document filing function.
  • You can change the number of copies and color mode at the time of printing.
  • If less than 10 MB is free in the storage area of the primary unit, the job will not be stored. Delete unneeded jobs and print again.
  • Select any print settings that are needed, and click the [OK] button.

    Start printing.

    In a macOS environment

    In the application, select [Print] from the [File] menu. Make sure that the machine's printer name is selected.

    Configure the print release function.

    1. Select [Job Handling].
    2. In macOS 13, [Job Handling] is located under the "Printer Options" menu.
    3. Click [Retention].
    4. Select the [Print Release] checkbox .
    5. Click [Authentication] and enter your user information as needed.
    6. If user authentication is not enabled, this step can be omitted.
      For more information, see “ Authentication Settings".
    7. Select any other print settings that are needed, and click the [Print] button.
    • The print release function cannot be used at the same time as the document filing function.
    • You can change the number of copies and color mode at the time of printing.
    • If less than 10 MB is free in the storage area of the primary unit, the job will not be stored. Delete unneeded jobs and print again.

    Start printing.

    PRINTING/DELETING A JOB STORED IN THE PRIMARY UNIT FROM A SECONDARY UNIT

    Language

    BP-90C70/BP-90C80
    User's Manual

    Version 03a / bp90c80_usr_03a_en