SEND DATA WHILE COPYING
This function allows you to send an e-mail with an image
attached, or save data in the network folder.
You need to store the destination in the address
book in advance.
STORING ADDRESSES THROUGH DIRECT ENTRYThe image send transmission starts after the copy, and
the settings same as the copy are used for transmission.
However, the same results as the copy may not be provided
by some functions.
Tap the [Detail] key to change to normal mode.
EASY MODETap [Send and Print] on the action panel.
Select a recipient from the address book.
SELECTING "Contacts"
OR "Group"After you have selected the recipient, tap the [Enter Address]
key.
You cannot use the soft keyboard to enter an address.
If you cannot find the recipient in the address book, enter it in
the address book.
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASSSet each copy item as required.
You can preview the scanned original by tapping
the [Preview] key.
Tap the [Color Start] or [B/W Start]
key to start copying.
After the copy, the transmission starts.
After the copy, you cannot preview the settings
before transmission.
