CHECKING TYPE AND SIZE OF PAPER
You can check the type and size of paper loaded in the
inserter on the display to the right of [Upper Tray] or [Lower Tray] key.
If the paper loaded is different from the type
that is indicated on the right of the key, tap the [Type and Size]
key or change the settings in "Settings".
Special media such as transparency film and tab paper cannot be
used.
To
change the paper settings for the paper you load in the inserter:
Tap the [Type and Size] key or in "Settings", select [System Settings]
→ [Common Settings] → [Paper Settings] → [Paper Tray Settings] → [Inserter(Upper)]
or [Inserter(Lower)].
If the paper size is not correctly detected or paper of a non-standard
size or type is loaded, specify this setting.
