Image Quality Adjustment

Collective Adjustment

Various devices mounted on the machine can be set.

Registration Adjustment

If the printed colors shift out of position when you print by Color printing, you can adjust the print position of each color to reduce color shifting.
Tap the [Execute] key.

Fusing Cleaning Mode

Use this function to clean the machine's fusing unit when dots or other dirt appear on the printed side of the paper. When this function is executed, "V" printed paper is output and the fusing unit is cleaned.

If improvement is not noticed after the first time you use the function, try executing the function again.

MC Cleaning Mode

This machine periodically executes automatic cleaning and normally it is not necessary to execute this mode. Only in case, however, that black lines appear on the printed paper, execute this mode.

PTC Cleaning Mode

If black lines or colored lines appear even after you have cleaned the document glass, automatic document feeder and main charger, execute this mode.

Black Letter/Black Line Width Adjustment

Adjust black text and the width of black lines. After using this function to perform adjustment, perform [System Settings] - [Common Functions] - [Auto Color Calibration (for Copy)], [Auto Color Calibration (for Print)].

Factory default settings:

0

Dark Streak Reduction

Specify to use the dark streak reduction or not.
The dark streak reduction can be used for Scan Original, Copy, Image Send, and Scan to local drive functions.
If the dark streak reduction is enabled, select any of the following options.

• Thin Dark Streak Reduction:
Use this setting to make thin dark streaks less apparent. (Low level)

• Normal:
Use this setting to make dark streaks less apparent. (Medium level)

• Thick Dark Streak Reduction:
Use this setting to make thick dark streaks less apparent. (High level)

Factory default settings:

Disable

Increasing the level of dark streak treatment may result in faint text and poor reproduction of lines.

Display Warning When Streak is Detected

Set this option to display a warning message when dark streaks are detected by the document feeder.

Factory default settings:

Disable

Copy Image Quality

Quick Image Quality Adjustment

You can easily perform copy quality adjustment in the default state.
You can change the default setting ([2]) to [1 (Smooth)] or [3 (Sharp)].

Factory default settings:

2

Color Balance (Color / B/W)

You can adjust the default color, gradation, and density of color copies and black & white copies.
The density of each color is divided into 3 ranges, and you can adjust the level of each.

Factory default settings:

All 0

Density Adjustment when [Auto] is selected for Exposure

Configure settings for color copying and black & white copying when [Auto] is selected for the copy exposure. The exposure can be adjusted separately for copying using the document glass and copying using the auto document feeder.

Factory default settings:

Color:Document Glass, Document Feeder:5 (Normal), B/W:Document Glass, Document Feeder:5 (Normal)

Sharpness

You can make copy images in the default state sharper or softer.

Factory default settings:

2

Print Image Quality

Quick Image Quality Adjustment (Color / B/W)

Perform quick adjustment of print quality.
You can change the default setting ([2]) to [1 (Smooth)] or [3 (Sharp)].
This setting can be set separately for color mode and monochrome mode.

Factory default settings:

All 2

Color Balance (Color / B/W)

You can adjust the tone and density of color in color printing and black & white printing. You can adjust the default color, gradation, and density of color copies and black & white copies.
The density of each color is divided into 3 ranges, and you can adjust the level of each.

Factory default settings:

All 0

Exposure Adjustment

Set the density of color printing and of black & white printing.

Factory default settings:

3 (Normal)

Color Line Width Adjustment

When color lines do not print correctly in special applications such as CAD, you can make lines thicker.

Factory default settings:

5

Scan Image Quality

RGB Adjust

Set the color tone (RGB) for scanning.

Factory default settings:

All 0

Sharpness

Use this setting to obtain a sharp image when scanning an original.

Factory default settings:

3 (Normal)

Contrast

You can adjust the contrast of scanned images.

Factory default settings:

3 (Normal)

Color Profile Settings

Set color profiles used for printing.

CMYK Simulation Profile

Current Profile Name

This shows the currently set profile name.

Save to PC

Save the current color profile on the computer.

Profile Update

Select the updated color profile and click the [Store] key.

CMYK Output Profile

Current Profile Name

This shows the currently set profile name.

Save to PC

Save the current color profile on the computer.

Profile Update

Select the updated color profile and click the [Store] key.

RGB Input Profile

Current Profile Name

This shows the currently set profile name.

Save to PC

Save the current color profile on the computer.

Profile Update

Select the updated color profile and click the [Store] key.

RGB Output Profile

Current Profile Name

This shows the currently set profile name.

Save to PC

Save the current color profile on the computer.

Profile Update

Select the updated color profile and click the [Store] key.

Common Functions

Auto Color Calibration (for Copy)/Auto Color Calibration (for Print)

Performs automatic color correction when the color is off.
For copying, adjust with [Auto Color Calibration (for Copy)]. For printing, adjust with [Auto Color Calibration (for Print)].
The machine prints a test patch, the test patch is scanned, and the color is automatically corrected.
After the [Execute] key is tapped and a test patch is printed, a message appears prompting you to begin automatic calibration.
Follow the instructions in the message to perform color adjustment.

Density Smoothing Adjustment

If uneven density occurs in a copy and others, use this function to smooth the density.
The uneven density is automatically corrected by scanning a test patch that you print.
After the [Execute] key is tapped and a test patch is printed, a message appears prompting you to begin automatic calibration. Follow the instructions in the message to perform density smoothing.
If there are no problems after adjustment, perform "Auto Color Calibration (for Copy)" and "Auto Color Calibration (for Print)".
To return the adjusted values to their factory default state, tap [Return Density Smoothing Adjustment Value to Defaults]. If you tapped [Return to the Defaults], perform adjustment of the density that you want to readjust (medium density in the default mode).

Factory default settings:

Middle