SHARP

Language

CHECKING THE ORIGINAL SIZE

EASY MODE

The size of the placed original is displayed in the upper left corner of the screen.
When you place the original in the automatic document feeder, the original icon appears next to the original size.

NORMAL MODE

Check the size of the placed original on the display of the [Original] key.
If you did not set the original size manually, the original size set in “Default Original Size Settings” in the System Settings (administrator) appears.
When you place the original in the automatic document feeder, the original icon appears above the automatic document feeder.

Orientation of placed original

Place the original as shown below.
If you place the original in an incorrect orientation, it may result in stapling at an unexpected position.
On "Preview Screen", view the image orientation or preview image.
PREVIEW SCREEN

Document glass
Document feeder tray
Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.
For information on the orientation of the original, see "SPECIFYING THE ORIENTATION OF THE ORIGINAL".
Language

Version 03a / bpb550wd_usr_03a _us

↑Top of page