SHARP

Language

BEFORE USING THE PRINT RELEASE FUNCTION

This section explains settings that must be configured before you can use the Print Release function.

SETTINGS REQUIRED ON THE MACHINE

To use the print release function, configure in setting mode (administrator).

Fixing the IP address of the machine

If the machine is used in a DHCP environment, the IP address of the machine may change. If this happens, you will not be able to send print release information to the machine.

Adding the print release icon to the Home screen

It is not necessary this setting, if already added the print release icon.

Tap [Edit Home] on the action panel.

Tap a place without a shortcut key in home edit mode.

Tap [Print Release].

Tap the [Edit End] key.

Home Edit Mode is exited and you return to the home screen.

INSTALLING THE PRINTER DRIVER OF THE PRIMARY UNIT

Install the printer driver of the primary unit on your computer. For the procedures for installing the printer driver, see the Software Setup Guide.

Language

Version 03a / bpb550wd_usr_03a _us

↑Top of page