The Machine Identification displays the system information
of the machine.
It displays the model name, current status, and machine location.
This setting can also be set by general users, except for
some items.
Item | Description |
---|---|
Unit Serial Number |
Indicates the serial number of the machine. |
Name |
When you tap the [Not Set] key, the [Machine Identification] screen appears. If [Name] is not set, [Not Set] appears. |
Model Name |
Displays the standard model name of the machine. |
Machine Location |
The information entered in the [Machine Location] item in [Machine Identification] appears. If no name has been set, [Not Set] appears. |
Current Status |
Displays the current status of the machine. If two or more errors occur at the same time, only one status is displayed according to the priority order. The errors and machine conditions are displayed in the following priority order.
|
Memo |
Displays text that the administrator entered. If you have logged in as an administrator, you can enter a memo. If no name has been set, [Not Set] appears. When you tap the [Not Set] key, the Machine Identification screen appears. |
Supply Status |
Displays the current status of supplies. If staples are installed, their status is displayed. |
Paper Input Tray Status |
Displays the current status of the paper trays installed in the machine. |
Display Pattern Setting |
Switches the display pattern of the home screen. |
[Reboot the MFP] key |
Displays the restart screen. (Administrator rights are required.) |
[Enter the Power Save Mode] key |
Displays the power save mode screen. (Administrator rights are required.) |
This function shows the page count in each mode.
This setting may require administrator privileges.
This screen shows the device status.
This setting can also be made by general users.
Item | Description |
---|---|
Paper Input Tray Status |
Displays the current status of the paper trays installed in the machine. |
Output Tray Status |
Displays the current status of the output tray installed in the machine. |
Supply Status |
Displays the current status of supplies. If staples are installed, their status is displayed. |
Device Configuration |
Displays the information of options installed in the machine. |
Local Drive Status |
Displays the usage status of the local drive. |
Displays general, TCP / IP, and DNS status information.
The contents displayed here are the items to be set in the
network settings and their setting values.
For each setting, see the following "
Network Settings".
This setting can also be made by general users.
Displays the security settings status of the machine.
The contents displayed here are the items to be set in the
security settings and their setting values.
For each setting, see the following "
Security Settings".
This setting can also be made by general users.
Shows the firmware version of the machine as a list.
This function requires administrator rights.
The Power Reset screen enables you to restart the machine
or enter the power save mode.
Item | Description |
---|---|
Reboot the MFP |
Reboots the machine. Tapping the [Execute] key opens the Restart screen, and then tapping the [Execute] key again restarts the machine. |
Enter the Power Save Mode |
Shifts the machine to power save mode. Tap the [Execute] key to open the power saving mode screen. |
Lists showing the settings and information registered
in the machine can be printed.
This setting can also be made by general users.
List name | Description |
---|---|
Machine Status List |
This list shows information needed by regular users, such as hardware statuses, software statuses, printer environment settings, and paper tray settings. |
Printer Test Page |
This is used to print the PCL Symbol Set List, various font lists, and the NIC page (network interface settings, etc.).
|
Sending Address List |
Lists can be printed of various addresses stored in the machine. |
Document Filing Folder List |
This shows the folder names for document filing. |
You can print out the lists and reports that only the
administrator can refer to.
When using "Image Sending Activity Report (Internet Fax)"
in Image Sending Activity Report (Auto), select "Setting mode" →
[System Settings] → [Image Send Settings] → [Internet Fax Settings] → [Receive Settings]
→ [2-Sided Printing of Received Data],
enabling you to specify 1-sided or 2-sided printing.
When using "Image Sending Activity Report (Fax)" in Image
Sending Activity Report (Auto), select "Setting mode" → [System Settings]
→ [Image Send Settings] → [Fax Settings] → [Receive Settings] → [2-Sided Printing
of Received Data], enabling
you to specify 1-sided or 2-sided printing.
Home Screen
Common
Lists of the administrator settings for the following modes
can be printed.
Network Settings
Security Settings
Energy Save Setting
Image Quality Adjustment
Image Sending Activity Report
The following Image Sending Activity Reports can each be separately
printed.
Data Receive/Forward List
The following lists showing reception settings and forwarding
settings can be printed.
Version 03a / bpb550wd_usr_03a _us