Energy Save

All items except for the Auto Power Shut-Off Mode and Preheat Mode Setting are available in the system settings of the Web page.
For Security Settings on the operation panel, see the following " THE SETTING MODE LIST OF THE OPERATION PANEL".

Eco Setting

The machine's power consumption can be reduced by Eco Mode setting. Although each function setting can be changed separately, the machine has the "Custom" and "Eco Mode" to allow simultaneous changing of settings.

Preheat Mode Setting

The time until the preheating mode works is 1 to 60 minutes in 1-minute units.
Preheat Mode will activate when the set duration of time elapses after printing ends and no further operations are performed. This function reduces your power costs, and at the same time helps conserve natural resources and reduce pollution.
Select the time that best suits the needs of your workplace.
The panel display can be turned Off in the Preheat mode.

Factory default settings:: 1 minutes

Preheat mode cannot be disabled.
This item is located under "Energy Save" in the system settings from the operation panel.

Auto Power Shut-Off Mode

Specify the time to transition to Auto Power Shut-Off Mode.
Specify this setting for remote jobs and for all other jobs.

Factory default settings:: Remote Job: Earliest, Other Job: 11 min.

This item is located under "Energy Save" in the system settings from the operation panel.

Sleep Mode Power Level

Low Power: The machine switches to the power saving mode, but it takes some time to recover.
Fast Wake Up: Compared with Low Power, the power value rises by a certain degree, but it results in faster recovery.

Factory default settings:: Low Power

Eco Fusing Setting

This function allows the fusing unit of the machine to be operated with the fusing unit of the machine turned off during operations that do not require printing on the machine.

Factory default settings:: Enable

Toner Save Mode

This mode is used to reduce toner consumption.
Toner consumption can be set for print jobs in “Printer.”
Toner consumption can be selected from three levels.

Toner Save1 (Toner Consumption: Much)
Toner Save2 (Toner Consumption: Middle)
Toner Save3 (Toner Consumption: Little)

Factory default settings:: All Invalid

Items may not be displayed depending on country and region.