Digital full colour multifunctional system BP-C131WD

This function collectively stores copy settings as one program. The stored program can be retrieved using an easy operation.
For information about how to retrieve a program, see " RETRIEVING A PROGRAM".
For example, suppose A4 (8-1/2" x 11") size CAD drawings are copied once a month for archive purposes using the following settings:

The A4 (8-1/2" x 11") size CAD drawings are reduced to A5 (5-1/2" x 8-1/2") size.

To reduce paper use by half, 2-sided copying is used.

‹-+›

When a job program is not stored	When a job program is stored
Set reduction from A5 (5-1/2" x 8-1/2") to A4 (8-1/2" x 11") Change the exposure setting. Set 2-sided copying. Tap the [Colour Start] or [B/W Start] key.	Retrieve the stored program. Tap the [Colour Start] or [B/W Start] key.
Considerable time is required to copy the drawings each month because the above settings must be selected. In addition, mistakes are occasionally made when selecting the settings, so some copies must be redone.	The settings are stored in a program, so they can be selected by the touch of a key. This is simple and takes no time. In addition, the settings are all stored so there are no chances for mistakes, and thus no need to redo copies due to setting mistakes.

When a job program is not stored

When a job program is stored

Set reduction from A5 (5-1/2" x 8-1/2") to A4 (8-1/2" x 11")

Change the exposure setting.

Set 2-sided copying.

Tap the [Colour Start] or [B/W Start] key.

Retrieve the stored program.

Tap the [Colour Start] or [B/W Start] key.

Considerable time is required to copy the drawings each month because the above settings must be selected.

In addition, mistakes are occasionally made when selecting the settings, so some copies must be redone.

The settings are stored in a program, so they can be selected by the touch of a key. This is simple and takes no time.

In addition, the settings are all stored so there are no chances for mistakes, and thus no need to redo copies due to setting mistakes.

Up to 8 programs can be stored.
Program settings remains registered even when the power has been turned off.

Specify the copy function to be stored.

Tap the [Menu] icon and tap [Program Registration/Deletion].

Tap [Program Registration].

Tap an unused key.

A key with a program registered is marked with a checkmark.

If you do not set a name for the program, a serial number will be automatically assigned as the name.

Set a name for the program and tap the [OK] key.

A registration completion message appears.

The number of copies cannot be stored.

Tap the [Call Program] key.

Tap the key of the program you want to retrieve.

This section explains how to delete copy settings in a program and rename a program.

Deleting a program

Tap the [Menu] icon and tap [Program Registration/Deletion].

Tap [Delete Program].

Tap the key of the program you want to delete, and tap [Delete].

Renaming a program

Tap the [Menu] icon and tap [Program Registration/Deletion].

Tap [Change Program Name].

Tap the key of the required program, and rename the program. Then tap the [OK] key.

After the settings are completed, tap [OK] key.

PROGRAMS

STORING A PROGRAM

RETRIEVING A PROGRAM

DELETING AND RENAMING A PROGRAM

Deleting a program

Renaming a program

CONTENTS MENU