Device Control

Condition Settings

AB/Inch Type Setting

The numbers and units of the default settings and input ranges that appear in the setting screens can be switched between inches and AB sizes.

Factory default settings:

Inch (AB)

Default Original Size Settings

Specify this setting when a particular original size is frequently used. The setting will appear in the [Original] key.
Specifying this setting allows the original size setting to be omitted.

Factory default settings:

All 8-1/2" x 11" (A4)

Paper Type for Auto Paper Selection

The paper types* that the Auto Paper Selection function will select can be specified. Select one of the following settings:

• Plain 1
• Plain 2
• Recycled

The Auto Paper Selection function will not select any paper types other than the paper types specified with this setting.

* The paper type set for each paper tray by selecting [System Settings] in "Settings" → [Paper Tray Settings].

Factory default settings:

Plain1, Plain2

Plain Paper Compatibility Settings

Set the basis weight of plain paper that is normally used.
Select from Plain1 and Plain2.
The weight of Plain Paper 1 is 16 to 24 lbs bond (60 to 89 g/m²). The weight of Plain Paper 2 is 24 to 28 lbs bond (90 to 105 g/m²).

Factory default settings:

Plain1

Disabling of Tray Settings

This setting is used to prohibit tray settings (except for the bypass tray).

Factory default settings:

Disable

Status Indicator Setting

Data Indicator Setting

Sets the operation of the information lamp. For details on the settings, see " INFORMATION INDICATOR".

Factory default settings:

Pattern 1

Information Indicator will blink if data is received

Set whether to blink the information lamp when there is received fax data.

Factory default settings:

Enable

Prioritize the indicator display of received data over the error indicator display

If there is received fax data, give priority to lighting the error display.

Factory default settings:

Disable

Error Light Setting

Sets the operation of the error lamp. For each setting, see the following " INFORMATION INDICATOR".

Factory default settings:

Light & Blink

Machine Identification Settings

Enter a name or code to identify the machine.

Clock Adjust

Use this to set the date and time in the machine's built-in clock.

Item	Description
Specify Time Zone	If your region is ahead of GMT (Greenwich Mean Time), select [+]. If your region is behind GMT, select [-]. Next, specify the time difference between your region and GMT in hours and minutes. (Example: If your region is Japan, + 9 hours 00 minutes.)
Date&Time Settings	Select and set the year, month, day, hour, and minute.

Daylight Saving Time Setting

Enable daylight saving time.

Item	Description
Daylight Saving Time Setting	Select whether or not the Daylight Saving Time Setting is enabled. If disabled, the following settings will not be possible. Factory default settings: Disabled
Select Setting Type	Specify whether the starting and ending day of daylight saving time are to be set using the day of the week or the date.
Start Time	Set the starting time of daylight saving time. If you selected "Day of the Week" in "Select Setting Type", set the starting week of daylight saving time and then the starting day. If you selected "Date" in "Select Setting Type", set the starting date. Set the hour and minute and the UTC (Coordinated Universal Time) setting.
Completing Time	Set the ending time of daylight saving time in the same way as you set the starting time.
Adjustment Time	Set the time to be adjusted when daylight saving time begins.

Enable/Disable Settings

The following settings enables or disables certain functions.
The prohibited setting items in the settings of each function such as Printer Settings and the items in this prohibited setting are linked.

Printer Settings

Prohibit Notice Page Printing
Disables to print a notice page.

Factory default settings:

Enable

Prohibit Test Page Printing
Disables to print the test page.
When this setting is enabled, [Status] → [Data List] → [List for User] → [Printer Test Page] in the Web page cannot be used to print test pages.

Factory default settings:

Disable

Exclude Bypass-Tray from Auto Paper Select
When [Auto] is selected for paper type selection, the bypass tray is excluded from the trays that can be selected. It is recommended when special paper is set up in the bypass tray frequently.

Factory default settings:

Disable

Disable Blank Page Print
Disables to print a blank page.

Factory default settings:

Disable

Image Send Settings

Disable Fax Broadcasting
Disables the facsimile broadcasting.

Factory default settings:

Disable

Disable Scan Function
Disable Storing to USB Memory
Set this when you want to prohibit data saving to a USB memory.

Factory default settings:

Disable

Settings to Disable Transmission
These settings are used to disable the following transmission operations.
Disable Selection from Address Book
Disables the selection of destinations from the address book.
Configure the setting for each of the following items:

• E-mail
• Network Folder/FTP/Desktop

Select All: Select all items.
Clear Checked: Deselect all items.

Factory default settings:

All Invalid

Disable Direct Entry
Disables the direct entry of destination address and others.
Configure the setting for each of the following items:

• E-mail
• Fax

Select All: Selects all items.
Clear Checked: Clears all selections.

Factory default settings:

All Invalid

Disabling of Find My Address
This prohibits Find My Address.

Factory default settings:

Disable

Device Control

Disabling of Tray Settings
This setting is used to prohibit tray settings (except for the bypass tray).

Factory default settings:

Disable

Product Key

E-mail Alert and Status
Enter the product key and application number for the above functions.