HOMEExample useCheck on blades for chips

Example use


Checking a blade for chips

  1. Applying Edge detection on two points of each side of a blade and one point at the tip of the blade
  1. Specifying INTERSECTN on the crossing point of both sides of the blade

In this check, falling between zero and five pixels is OK.
(Which means the chip is between zero and 0.0175 millimeter, since the resolution is 3.5 micrometer.)
OK (2.3 pixels) NG (12.4 pixels)

Problems before the introduction of the system   Results after the introduction of the system
Manual inspection, checking with the workers' own eyes, had possibilities of missing minute chips. Image processing enables to detect even minute chips.
Also to provide customers with products in uniform quality.

HOMEExample useCheck on blades for chips
PreviousTo the top of this page