OUTPUT

Specify whether or not the set of output will be stapled.
Portrait orientation

Original Orientation	Staple	Staple Position
		Left	Top	Right
Portrait orientation	1 Staples
	2 Staples
	Stapleless Staple
Landscape orientation	1 Staples
	2 Staples
	Stapleless Staple

Staple ON (excluding saddle stitch)

Tap the [Staple / Punch] key.

COPY MODE

Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
SPECIFYING THE ORIENTATION OF THE ORIGINAL

Select the number of staples and staple position.

• After the settings are completed, tap [OK] key.
• A binding position cannot be selected for stapleless stapling.

• When stapleless stapling is selected, the function of automatic paper selection cannot be used.
• If stapleless stapling is selected on paper that cannot use stapleless stapling and stapleless stapling is used, stapleless stapling will not be used, and only copies will be made.

In normal mode

• Tap the [Staple Sort] key.

• To change the output paper output tray, select the output destination in [Output Tray] of [Other Functions] before setting the staples.
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap [Continue] or [Cancel].
[Cancel]: Cancels the staple sort setting.
[Continue]: Continues sorting without stapling.

Saddle Stitch

Tap the [Staple / Punch] key.

COPY MODE

Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
SPECIFYING THE ORIENTATION OF THE ORIGINAL

Select .

Select binding edge and original settings.

After the settings are completed, tap [OK] key.
MAKING COPIES IN PAMPHLET FORMAT (BOOKLET)

In normal mode

• If [Booklet] is already specified in [Others], you do not need configure binding edge and cover settings.
• If [Booklet] is specified in [Others], the saddle stitch screen appears. Confirm the message shown on the screen, and tap the [OK] key.
• For enabling only saddle stitch stapling on a paper with binding layout without enabling the booklet binding function, "Settings (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Condition Settings], and [Automatic Saddle Stitch] to [OFF].
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap [Divide], [Continue] or [Cancel].
[Cancel]: Cancels printing.
[Divide]: Divide the document into the number of sheets that can be stapled and saddle staple them.
[Continue]: Continue printing without saddle stapling.
Note that [Divide] may not be displayed depending on the setting status.

This function punches copies and outputs them to the tray.
Example: When the original is in either portrait or landscape orientation, and the punch position is set to the left

Original Orientation	Punch Position
	Left	Top	Right
OFF	Does not punch.
Portrait orientation
Landscape orientation

This function is used to fold copies before delivery to the output tray.
When a paper folding unit is installed, you can fold papers in Z-fold and C-fold.
When a saddle stitch finisher is installed, you can use saddle folds.
The paper sizes that can be selected vary depending on the type of paper fold.
Example: Fold Inside, Fold Outside

Types of folds and paper sizes available

Fold	Paper Size	Image
Saddle Fold	A3W, A3, B4, A4R, B5R*1, 8K, 16KR, 12" × 18", 11" × 17", 8-1/2" × 14", 8-1/2" × 13-1/2" *2, 8-1/2" × 13-2/5" *2, 8-1/2" × 13" *2, 8-1/2" × 11"R
Half Fold	A4R, A3, B4, 11" × 17", 8-1/2" × 14", 8-1/2" × 13-2/5", 8-1/2" × 11"R, 8K
C-Fold	A3, A4R, 11" × 17", 8-1/2" × 14", 8-1/2" × 13-2/5", 8-1/2" × 11"R
Accordion Fold	A3, A4R, 11" × 17", 8-1/2" × 14", 8-1/2" × 13-2/5", 8-1/2" × 11"R
Z-Fold	A3, B4, A4R, 8K, 11" × 17", 8-1/2" × 14", 8-1/2" × 13-2/5", 8-1/2" × 11"R*3

*1 Cannot be used when a finisher (large capacity) or saddle stitch finisher (large capacity) is installed.

*2 Cannot be used when a finisher or saddle finisher is installed.

*3 This paper size cannot be output to the finisher tray.

Tap the [Detail] key to change to normal mode.

EASY MODE

Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
SPECIFYING THE ORIENTATION OF THE ORIGINAL

Tap the [Others] key, and tap the [Fold] key.

Select the folding method.

After the settings are completed, tap [OK] key.

This function inserts separator pages between each set of copies or between each job.
When you insert separator pages between sets of copies, you can specify whether to insert the separator page before or after each set. You can also specify the number of copies that makes one set.
When you insert separator pages between jobs, you can specify whether to insert a separator page before or after each job.

Separator page insertion examples

In the following examples, four copies of a two-page original are output.
Inserting a separator page before each set of two copies

Tap the [Detail] key to change to normal mode.

EASY MODE

Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
SPECIFYING THE ORIENTATION OF THE ORIGINAL

Tap the [Others] key, and tap the [Separator Page] key.

Specify the separator page insertion mode.

• To insert separator pages between sets of copies, set the [Insert Top of Sets] or [Insert End of Sets] checkbox to . Next, tap to specify the number of copies in each set.
• To insert separator pages between jobs, set the [Insert Before Job] or [Insert After Job] checkbox to .
• After the settings are completed, tap [OK] key.

To change the separator page tray:
Tap the [Paper Tray] key to display the tray selection screen. Tap the separator page tray in the tray selection screen. For more information, see " SELECTING THE PAPER TRAY FOR COPYING" and " SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON BYPASS TRAY".

To cancel the separator page insertion setting:
Clear the checkmark for separator page insertion mode.