SHARP

Language

COPYING

This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this chapter.

Switch to copy mode.

SELECTING COPY MODE

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS

Select functions.

Specify the original scan size, exposure, resolution, etc.
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
SPECIFYING THE ORIENTATION OF THE ORIGINAL
In Normal mode
SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL
SELECTING THE PAPER TRAY FOR COPYING
AUTOMATIC 2-SIDED COPYING
ENLARGING/REDUCING THE LENGTH AND WIDTH SEPARATELY
AUTOMATIC ADJUSTMENT OF EXPOSURE AND ORIGINAL TYPE
OUTPUT
OTHER FUNCTIONS
In Easy mode
SELECTING THE PAPER TRAY FOR COPYING
AUTOMATIC 2-SIDED COPYING
AUTO RATIO SELECT
OUTPUT
SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL
AUTOMATIC ADJUSTMENT OF EXPOSURE AND ORIGINAL TYPE
COPYING MULTIPLE ORIGINALS AS A SINGLE PAGE (N-Up)
COPYING BOTH SIDES OF A CARD AS A SINGLE PAGE (CARD SHOT)
COLLECTIVELY SCANNING A LARGE NUMBER OF ORIGINALS (JOB BUILD)
SKIPPING BLANK PAGES IN AN ORIGINAL (BLANK PAGE SKIP)
COPYING EACH FACING PAGE OF A BOUND DOCUMENT (DUAL PAGE COPY)

Scan the original.

Tap the [Preview] key to scan the original.
In Easy mode
In Normal mode
  • To make 2-sided copies, configure the 2-sided copy settings before scanning the original.
  • AUTOMATIC 2-SIDED COPYING
  • When not checking the preview image, tap the [Start] key to start copying.

Check the preview image.

Display the preview image of the scanned original.
In the preview screen, check the settings.
PREVIEW SCREEN
In Easy mode
In Normal mode

Tap the [Start] key to start copying.

When making only one set of copies, you do not need to specify the number of copies.
  • To cancel all settings, tap the [CA] key.
  • When the [CA] key is tapped, all settings selected to that point are cleared and you will return to the base screen.
  • To cancel copying, tap the [Cancel Copy] key.
  • To make two or more sets of copies:
  • Tap the copies display key to specify the number of copies.
    In Easy mode
    In Normal mode
  • In normal mode, you can tap [File] or [Quick File] on the action panel before starting the copy job to save the scanned original as a file.
  • QUICK FILE
    FILE

DEFAULT SETTINGS FOR COPYING

Set in "Initial Status Settings” of "Copy Settings” in the System Settings.
Initial Status Settings

Language

Version 03a / bp70m65_usr_03a_en

↑Top of page