FAX TRANSMISSION SEQUENCE
This section explains the basic steps for sending a
fax.
Place the original.
Place the original in the document feeder tray of the automatic
document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Enter the destination fax number.
Tap the numeric keys to enter the destination number
directly, or search and retrieve the address book or number.
In Normal mode
In Easy mode
Configure the settings.
Specify the original scan size, exposure, resolution,
etc.
If necessary, you can refer to the following functions
for the setting.
In Normal mode
In Easy mode
Send the original.
Tap the [Start] key.
- To check a preview
of a scanned image, tap the [Preview] key before tapping the
[Start] key.
- When the
original is placed on the document glass:
- When
sending a fax normally (memory transmission)
Repeat
the steps for placing and scanning the originals the same number
of times as there are originals. After scanning all originals, tap
the [Read-End] key.
- When sending
a fax in direct transmission mode
Multi-page
originals cannot be scanned in direct transmission mode. Tap the
[Start] key to start transmission.
- In normal mode, if you
tap [File] or [Quick File] on the action panel before starting
fax transmission, you can save the scanned original as data.
QUICK FILE
FILE
.png)
