The network scanner allows you to create
an image file from the original data scanned by the machine, and
send the file over a network to a PC, FTP server, or other destinations.
If necessary, it scans the original using a TWAIN-compliant application
on your PC.
The network scanner function provides the following scanning
modes.
The scanner function of the machine sends a scanned
original as described below based on the specification of the destination.
In data entry mode, information entered using the touch
panel or automatically generated by the machine is sent to a directory
on an FTP server or an application on a PC as a metadata file in
XML format.
To use the machine as a network scanner,
you must store sender information, configure server settings, store destinations
in the address book, and perform other required operations.
Make sure the main power switch is in the “ " position.
When the main power indicator is lit up, the main power is in the “ " position. If the main power indicator is not lit up, turn the main power switch to the “ " position and press the [POWER] button on the operation panel.Check the date and time.
Verify that the correct date and time are set in the machine.Store the sender information.
Before using Scan to E-mail:Configure settings required in the setting mode.
Configure server settings, default settings for the network scanner.Store the destination addresses for each scan mode in the address book.
You can send an image by directly entering an address when using Scan to Image. It is convenient to previously store addresses in the address book.Version 03a / bp90c80_usr_03a_en