AUTOMATIC DOCUMENT FEEDER

This section explains how to place originals in the automatic document feeder.

Place originals of different sizes together, if needed, in the automatic document feeder. In that case, use the "Others" function in each mode to set [Mixed Size Original].
See the following pages for the combinations of document sizes that can be loaded.

SCANNING ORIGINALS OF DIFFERENT SIZES (MIXED SIZE ORIGINAL)

Before inserting originals into the document feeder tray, be sure to remove any staples or paper clips.
If originals have damp spots due to correction fluid, ink or paste up glue, wait until the originals are dry before making copies. Otherwise the interior of the machine or the document glass may be soiled.
Do not use the following originals. Transparency film or other transparent material for backup copy, tracing paper, carbon paper, thermal paper or originals printed with thermal transfer ink ribbon should not be fed through the document feeder. Originals to be fed through the feeder should not be damaged, crumpled, folded, loosely pasted together, or have cut-out holes. Originals with multiple punched holes other than two-hole or three-hole punched paper may not feed correctly.
Business cards may not be scanned correctly depending on the condition, material, shape and processing method used.
When using originals with two or three holes, place them so that the punched edge is at a position away from the feed slot of the document feeder tray. Specify the orientation of the original using [Original].

Depending on the condition of the original, the type of paper, and the temperature and humidity of the environment in which the machine is used, multiple sheets of paper may be fed at the same time and may not be scanned correctly, or the ejected originals may not be neatly aligned.

For copying: Set the resolution to 600x600dpi
For scan transmission: use "Preview"

When the document rolls in the original exit tray on the automatic document feeder in the BP-C535WD/BP-C545WD, fix the paper fixing arm at the center to the top.

Allowed original sizes

Minimum original size	Maximum original size
Standard size 5-1/2" (longitudinal) x 8-1/2" (transversal) 105 mm (longitudinal) x 148 mm (transversal), or A6 Non-standard size (Minimum size that can be specified manually) 4-1/4" (longitudinal) x 5-1/2" (transversal) 105 mm (longitudinal) x 140 mm (transversal) Business card 2" (longitudinal) x 3-1/2" (transversal) 51 mm (longitudinal) x 89 mm (transversal)	Standard size 8-1/2" (longitudinal) x 14" (transversal) 210 mm (longitudinal) x 297 mm (transversal) or A4 Non-standard size (Maximum size that can be specified manually) Copy mode: 8-1/2" (longitudinal) x 14" (transversal) 216 mm (longitudinal) x 356 mm (transversal) image send mode: 8-1/2" (longitudinal) x 19-5/8" (transversal) 216 mm (longitudinal) x 500 mm (transversal) Business card 2-11/64" (longitudinal) x 3-19/32" (transversal) 55 mm (longitudinal) x 91 mm (transversal)

Minimum original size

Maximum original size

Standard size

5-1/2" (longitudinal) x 8-1/2" (transversal)

105 mm (longitudinal) x 148 mm (transversal), or A6

Non-standard size

(Minimum size that can be specified manually)

4-1/4" (longitudinal) x 5-1/2" (transversal)

105 mm (longitudinal) x 140 mm (transversal)

Business card

2" (longitudinal) x 3-1/2" (transversal)

51 mm (longitudinal) x 89 mm (transversal)

Standard size

8-1/2" (longitudinal) x 14" (transversal)

210 mm (longitudinal) x 297 mm (transversal) or A4

Non-standard size

(Maximum size that can be specified manually)

Copy mode:

8-1/2" (longitudinal) x 14" (transversal)

216 mm (longitudinal) x 356 mm (transversal)

image send mode:

8-1/2" (longitudinal) x 19-5/8" (transversal)

216 mm (longitudinal) x 500 mm (transversal)

Business card

2-11/64" (longitudinal) x 3-19/32" (transversal)

55 mm (longitudinal) x 91 mm (transversal)

When the original is a non-standard size, see the appropriate explanation below for the mode you are using.

COPIER: "STORING FREQUENTLY USED ORIGINAL SIZES"
FAX: " SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES"
IMAGE SEND: "SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES"

In fax or Imaging send mode, to load a 19-11/16" (500 mm) long original, you need to set the scan size to [Long Size]. In fax mode, see " SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE" and " SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES", and in image sending mode, see " SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE" and " SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES".

Allowed original weights

BP-C535WR

1-sided scanning: 13 to 28 lbs Bond (50 to 105 g/m²)

2-sided scanning: 13 to 28 lbs Bond (50 to 105 g/m ²)

Business card: 0.1 to 0.2 mm

Business cards cannot be two-sided scanned.

BP-C535WD/BP-C545WD

1-sided scanning: 9 to 32 lbs Bond (35 to 128 g/m²)

2-sided scanning: 13 to 32 lbs Bond (50 to 128 g/m ²)

Business card: 0.1 to 0.2 mm

To scan originals from 9 to 13- lbs Bond (35 to 49 g/m²), use "Slow Scan Mode" in the "Others" function. Scanning without using "Slow Scan Mode" may result in original misfeeds.
* The BP-C535WR cannot scan thin paper.

Make sure that there is no original on the document glass.

Place the original.

BP-C535WR
Up to 50 sheets can be inserted.
Business card:
Up to 25 sheets can be inserted.
BP-C535WD/BP-C545WD
Up to 100 sheets can be inserted.
Business card:
Up to 25 sheets can be inserted.
After scanning is finished on the automatic document feeder, remove originals from the original exit tray.

AUTOMATIC DOCUMENT FEEDER

CONTENTS MENU