SHARP

Language

AUTOMATIC 2-SIDED COPYING

USING THE AUTOMATIC DOCUMENT FEEDER FOR 2-SIDED COPYING

  • To make 2-sided copies, configure the 2-sided copy settings before scanning the original.
  • Dual-side copy helps to save paper.

Place the original in the document feeder tray of the automatic document feeder.

AUTOMATIC DOCUMENT FEEDER

Tap the [2-Sided Copy] key.

PREVIEW SCREEN

Select 2-sided copy mode.

  1. Select the 2-sided copy type.
  2. When the original is set to "2-Sided", select "Book" or "Tablet" in "Original Binding".
  3. When the output is set to "2-Sided", select "Book" or "Tablet" in "Output Binding".
  4. After the settings are completed, tap [OK].

Check the paper (tray) and color mode you want to use for copying, and tap the keys for any other settings you want to select.

Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
SPECIFYING THE ORIENTATION OF THE ORIGINAL
For details on the functions that can be set, see step 3 in "COPYING".

Check the preview.

PREVIEW SCREEN

Tap the [Color Start] or [B/W Start] key to start copying.

USING THE DOCUMENT GLASS FOR 2-SIDED COPYING

Dual-side copy helps to save paper.

Place the original on the document glass.

DOCUMENT GLASS

Tap the [2-Sided Copy] key.

BASIC PROCEDURE FOR MAKING COPIES

Select the 2-sided copy mode.

  1. Tap the [1 → 2] key.
  2. When the output is set to "2-Sided", select "Book" or "Tablet" in "Output Binding".
  3. After the settings are completed, tap [OK].
    The [2 → 2] key and [2 → 1] key cannot be used when copying from the document glass.

Check the paper (tray) and color mode you want to use for copying, and tap the keys for any other settings you want to select.

Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
SPECIFYING THE ORIENTATION OF THE ORIGINAL
For details on the functions that can be set, see step 3 in "COPYING".

Tap the [Color Start] or [B/W Start] key.

Set the next original, and tap the [Color Start] or [B/W Start] key to scan the original.

Tap the same key you tapped in step 5.
Repeat this step until all originals have been scanned.

Tap the [Read-End] key to start copying.

Language

Version 02a / bpc545wd_usr_02a _us

↑Top of page