FILE TRANSMISSION
The settings used when the file was stored with document
filing are stored, and thus the file can be transmitted using those
settings. If needed, you can also change the transmission settings
to modify the retrieved file.
After selecting the desired file, follow the steps below.
SELECTING A FILE TO RETRIEVE
- A file saved in
black and white or grayscale cannot be transmitted in color.
- A stored print job cannot
be transmitted. (However, if the job was filed in the printer driver,
it can be transmitted if "Rip Style" is set to [RGB]. This
settings is accessed by selecting the [Other Settings] button on the
[Detailed Settings] tab.)
- These transmission
methods require installation of the corresponding options.
- If any of the following
other modes were included in the saved file, the file cannot be
transmitted.
- "Stamp",
"Photo Repeat", "Multi-Page Enlargement" for copying.
- If any of the following
other modes were included in the saved file, the file can be transmitted,
but other functions cannot be executed.
"Margin Shift", "Transparency Inserts", "Book Copy", "Tab Copy", "Stamp",
all "Color Adjust" menu items, "Centering"
- Depending on the reduction
or enlargement ratio used when storing a file, it may not be possible
to send the stored file using a selected resolution setting. In
this event, try changing the resolution.
However,
when sending a stored file by Internet fax, transmission may not
be possible even if the resolution is changed.
- Files saved in other
than Internet Fax mode cannot be sent to an Internet Fax address.
- When the original job
is not a Print Jobs, Fax Receive Job, or Internet Fax Receive Job
and the resend format is a PDF format, this function automatically
corrects the skew and sends if the original is scanned while skewed.
Since this functions is the same as the scanner function, see “
AUTOMATICALLY ADJUST SKEWED SCAN DATA (Original Skew Adjustment)".
Tap [Send] on the action panel.
Select settings for sending.
Tap the [Start] key.
