AUTOMATIC DOCUMENT FEEDER
This section explains how to place originals in the
automatic document feeder.
- Place originals
of different sizes together, if needed, in the automatic document
feeder. In that case, use the "Others" function in each mode
to set [Mixed Size Original].
- See the following pages for
the combinations of document sizes that can be loaded.
Copy:
SCANNING ORIGINALS
OF DIFFERENT SIZES (MIXED SIZE ORIGINAL)
Scanner:
SCANNING ORIGINALS OF DIFFERENT SIZES (MIXED SIZE ORIGINAL)
- Before inserting originals
into the document feeder tray, be sure to remove any staples or
paper clips.
- If originals have damp spots
due to correction fluid, ink or paste up glue, wait until the originals
are dry before making copies. Otherwise the interior of the machine
or the document glass may be soiled.
- Do not use the following originals.
Incorrect original size detection, original misfeeds, and smudges
may result.
Transparency film or other transparent material for backup copy,
tracing paper, carbon paper, thermal paper or originals printed
with thermal transfer ink ribbon should not be fed through the document
feeder. Originals to be fed through the feeder should not be damaged,
crumpled, folded, loosely pasted together, or have cut-out holes.
Originals with multiple punched holes other than two-hole or three-hole
punched paper may not feed correctly.
- Business cards may not be
scanned correctly depending on the condition, material, shape and
processing method used. (Business cards can be set in the automatic
document feeder.)
- When using originals with
two or three holes, place them so that the punched edge is at a
position away from the feed slot of the document feeder tray. Specify
the orientation of the original using [Original].
- Depending on the condition
of the original, the type of paper, and the temperature and humidity
of the environment in which the machine is used, multiple sheets
of paper may be fed at the same time and may not be scanned correctly, or
the ejected originals may not be neatly aligned.
It may be improved
by the following settings.
- For copying: Set the
resolution to 600x600dpi
- For scan transmission: use
"Preview"
- When the document rolls in
the original exit tray on the automatic document feeder, fix the
paper fixing arm at the center to the top.
Allowed original sizes
Minimum original size |
Maximum original size |
Standard size
(Minimum size that can be automatically detected)
A6R: 105 mm (longitudinal) × 148 mm (transversal)
5-1/2" (longitudinal) × 8-1/2" (transversal)
Non-standard size
(Minimum size that can be specified manually)
51 mm (longitudinal) x 128 mm (transversal)
2-1/64" (longitudinal) x 5-3/64" (transversal)
Business card: 51 mm (longitudinal) x 89 mm (transversal)
|
Standard size
(Maximum size that can be automatically detected)
A3: 297 mm (longitudinal) x 420 mm (transversal)
11" (longitudinal) x 17" (transversal)
12" × 18" (A3W) cannot be used.
Non-standard size
(Maximum size that can be specified manually)
Copy mode:
297 mm (longitudinal) x 432 mm (transversal)
11-5/8" (longitudinal) x 17" (transversal)
Image send mode:
297 mm (longitudinal) × 1000 mm (transversal)
11" (longitudinal) × 39-3/8" (transversal)
|
Allowed original weights
BP-90C70/BP-90C80
|
1-sided scanning: 35 to 220 g/m2 (9 lbs
Bond to 80 lbs Cover)
2-sided scanning: 50 to 220 g/m2 (13 lbs
Bond to 80 lbs Cover)
Business card: Thickness, 0.1mm to 0.2mm
|
To scan originals from 35 to 49 g/m2 (9
to 13- lbs Bond), use "Slow Scan Mode" in the "Others" function.
Scanning without using "Slow Scan Mode"
may result in original misfeeds.
To scan originals 158 to 220 g/m2 (32
lbs Bond to 80 lbs Cover), use "Heavy Paper Scan" in the "Others"
function.
Scanning without using "Heavy Paper Scan" may result in original
misfeeds.
Make sure that there is no original on the document
glass.
Place the original.
Up to 300 sheets can be inserted.
After scanning is finished on the automatic document
feeder, remove originals from the original exit tray.
PREVENTIVE LIGHT TO INDICATE
ORIGINAL LEFT BEHIND
In order to prevent originals being left
behind, the automatic document feeder incorporates a lamp on the
top of the original exit tray.
This lamp detects a document on the automatic document feeder,
and starts blinking after the last original is output from the original
exit tray.
Light turning off
The preventive light to indicate original left behind
will turn off in the event of the following.
- When the scanned
original is removed
- After the preventive light
to indicate original left behind blinks three times, repeated three
times
- When a new original is placed
in the automatic document feeder, and a job started
- When the machine enters sleep
mode
- When use of the automatic
document feeder is prohibited
- When the preventive light to indicate
original left behind is blinking, placing the original on the document
glass will not turn off the preventive light to indicate original
left behind.
- The preventive light to indicate original
left behind will not turn off by only placing an original on the
automatic document feeder.
- The preventive light to indicate original
left behind will not turn off even if the operation panel is off.
- If the preventive light to indicate original
left behind turns off, this will not flash even if an original is
left on the automatic document feeder.
ORIGINAL SETTING INDICATOR
The original setting indicator lights when
the document is correctly loaded on the document feeder tray.
If the original setting indicator is lit, it is possible for
a user who has difficulty in confirming that a document is loaded
on the document feeder tray to confirm that the document is loaded.
SKEW FEED PREVENTION
The automatic document feeder is equipped
with a skewed feed prevention function. When a document is loaded
at an angle, the function stops loading the document as misfeed.
DOUBLE FEED DETECTION
This automatic document feeder is equipped
with a double feed detection function.
If you attempt to scan multiple originals at the same time,
scanning stops as misfeed.