SCANNING FUNCTIONS

This function divides the originals into sets and feeds each set through the automatic document feeder one set at a time when copying a very large number of originals.
This saves you the trouble of sorting the copies.
When scanning originals that are separated into sets, scan the set that has the first page first.
The individual copy settings can be configured for each set of originals to be scanned separately.
Up to 100 sets of originals can be scanned for one job.

Copying in job build mode

Tap the [Others] key, and tap the [Job Build] key.

A checkmark appears on the icon.
After the settings are completed, tap the [OK] key.

To cancel the job build setting
Tap the [Job Build] key to uncheck it.

Change settings as needed.

Place the original in the document feeder tray of the automatic document feeder, and tap the [Start] key to scan the first original.

Insert the originals all the way into the document feeder tray. Originals can be stacked up to the indicator line.
AUTOMATIC DOCUMENT FEEDER

Place the next set of originals and tap the [Start] key.

Repeat this step until all originals have been scanned.

• To change copy settings for each set of originals, tap the [Change Setting] key. For more information, see “ Changing the copy settings for each set of originals”.
• If you tap the [Preview] key, you cannot scan additional pages.

Repeat until all pages have been scanned and check the preview image in the preview screen.

To cancel all settings:
Tap the [CA] key.

Tap the [Read-End] key to start copying.

Changing the copy settings for each set of originals

As necessary, change copy settings for each set of originals.
Perform the steps below before scanning the next set of originals in step 4 of “Copying in job build mode".

This feature copies originals in different sizes at the same time even when B4 (8-1/2" x 14") size originals are mixed with A3 (11" x 17") size originals.
When scanning the originals, the machine automatically detects the size of each original and uses paper appropriate for that size.
When mixed size original is combined with auto ratio selection, the ratio is adjusted individually for each original according to the selected paper size, enabling printing on a uniform paper size.

When mixed size original is combined with auto ratio selection
(When A3 (11" x 17") is selected with the auto ratio selection, B4 (8-1/2" x 14") size original is enlarged to A3 (11" x 17") size for printing.)

There are two settings for mixed size originals.

Tap the [Others] key, and tap the [Mixed Size Original] key.

Tap the [Same Width] key or the [Different Width] key as appropriate for the originals.

After the settings are completed, tap [OK] and [Back] keys in sequence.

To cancel the mixed size original setting
Tap the [Off] key.

Place the original face up on the document feeder tray with the corners aligned together in far left corner.

Place the original as shown on the Mixed Size Original screen.

For mixed size originals, set "Original" to "Auto".

Tap the [Colour Start] or [B/W Start] key to start copying.

When you wish to scan thin originals using the automatic document feeder, you can use this function, which helps prevent thin originals from misfeeding.

When you wish to scan heavy originals using the automatic document feeder, you can use this function, which helps prevent heavy originals from misfeeding.

This function adjusts the resolution when scanning the original, enabling the high-quality output or speed-priority output according to the application.

Tap the [Others] key, and tap the [Scan Resolution] key.

Select the resolution.

The resolution can be set to both the document feeder and document glass. After the settings are completed, tap [OK] and [Back] keys in sequence.

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS

Tap the [B/W Start] key to start copying.