When you tap the job status
display, the job status screen appears. Tap it again to return to
the previous mode.
- Print
Lists print jobs such as printing from a PC,
USB direct print, printing of Data List from system settings and
reprint jobs.
The background of the job status display changes
as follows:
- Green: Job in progress
- Yellow: Warming up/waiting
- Red: Waiting for error clearing
Jobs move among the lists according to the processing
status, from [Spool], [Job Queue] and [Complete], in that
order.
To switch the job list display to the display by processing
status, tap the [Spool], [Job Queue] or [Complete] key as desired.
- Spool list
Lists print jobs up to the transfer to the machine.
The jobs move to the Job Queue list after the transfer is completed.
If you printed an encrypted PDF file by direct
print, enter the password from here to print the file.
- Job Queue list
Lists jobs in progress and in the queue for
printing from a computer.
- Complete list
Lists jobs through with printing.
Tap the job status display.
Tap the [Job Queue] key.
When you wish to stop a print job being sent from
the computer, tap the [Spool] key.
Tap [Stop/Delete] on the action panel.
When a screen appears that allows you to confirm that
you do want to stop the job, tap the [Cancel] key.
- If the machine runs out of paper
during a print job, you can cancel the job from the job status screen.
- To delete more than one job, operate the
check box for [Enter Plural Selection Mode] on the action panel so that it looks
like
.
The job currently in progress is suspended
to let the priority job make interruption.
Tap the job status display.
Tap the [Job Queue] key.
Tap the job for priority processing and then tap [Change
Job Priority] on the action panel.
Changing the job order
If there is a job in progress, an interrupt job can
be performed, or a job can be moved down in the queue to change
the job order. Tap the key of the job you want to move, and tap
the "Priority Change" key.
-
key
Moves the selected
job to the top of the queue. The current job will be interrupted
and the selected job starts.
-
key
Moves the selected
job up one position. When the second job from the top is selected,
tapping this key interrupts the current job and starts the selected
job.
-
key
Moves the selected
job down one position.
-
key
Moves the selected
job to the bottom of the queue.
The jobs below cannot be moved.
Job currently in progress, list print jobs, and jobs when Passing
Prohibited is set in the system settings.
In print tab, you can switch the display in the "Job Queue"
screen between the number of printed copies and remaining copies
to be printed for each job.
BEFORE USING THE MACHINE 
OPERATION OF THE MACHINE 
PRINTER 
DOCUMENT FILING 
CONVENIENT USE OF THE MACHINE 
SETTING MODE 
TROUBLESHOOTING 
APPENDIX
