Operation Settings

Displays large characters on the screen.
appears in the system area when Large Character Mode is enabled.

Factory default settings:

Disable

The duration of time that messages appear in the touch panel (the time until a message is automatically cleared) can be set to any number of seconds from 1 to 12.

Factory default settings:

6 seconds

The language that appears in the touch panel can be changed to any language.

Factory default settings:

Varies depending on country and region

Set the screen that appears after auto clear and login.
Print Release, Document Filing, Select from the Home Screen, Sharp OSA screen.

Factory default settings:

Home Screen

When switching between modes, first set whether to display the "System Information Screen".

Factory default settings:

Disable

This setting specifies whether or not to display the IP address of the machine on the "System Information" screen.

Factory default settings:

Enable

Specify whether or not to display with the action panel on the screen.

Factory default settings:

Enable

Show an icon when a LAN cable is not connected.

Factory default settings:

Enable

Show a confirmation dialog box when a job is canceled.

Factory default settings:

Disable

Set whether to display a notification message when a job is completed.

Factory default settings:

Enable

When this setting is enabled, the total count is hidden when checking the total count from the home screen.

Factory default settings:

Disable

Set whether the remaining number of sets or the final number of sets is shown in the job status.

Factory default settings:

Progress

Specify whether or not to display the estimated start time of the job in the job status.

Factory default settings:

Enable

Set whether the numeric keys are arranged in ascending order with "1" in the upper left corner, or "1" in the lower left corner.

Factory default settings:

Ascending order from upper left

Select settings for the path information of the setting destination displayed when setting mode is set on the machine.
Display Current Path
Set whether or not the current setting items are shown in the path information.

Factory default settings:

Enable

Enable link of current path
Set whether the link at the top is enabled.

Factory default settings:

Enable

Set the background color of the touch panel. Each time you change patterns, the touch panel image at the bottom of the screen changes.

Factory default settings:

Pattern 2

Auto Clear Setting
The time until Auto Clear activates can be set to any number of seconds from 10 to 240 in increments of 10 seconds.
If the machine is not used for the duration of time set here, the auto clear function will clear any settings that have been selected and return the screen to the base screen of the job status screen.

Factory default settings:

60 seconds

Cancel Timer
This is used to disable the auto clear function.

Factory default settings:

Disable

Key Operation Setting
Time for Accepting Key Entry

This setting determines how long a key in the touch panel must be tapped until the key input is registered. The time can be set from 0 to 2 seconds in increments of 0.5 seconds.
By lengthening the time setting, key input can be prevented when a key is tapped accidentally. Keep in mind, however, that when a longer setting is selected more care is required when tapping keys to ensure that key input is registered.

Factory default settings:

0.0 seconds

Disable Auto Key Repeat
This is used to disable key repeat.

Factory default settings:

Disable

Key repeat causes a setting to change continuously not only each time the key is tapped but while a key is tapped.
Time for Accepting Key Entry of Long Touch
Select a time when a long key touch is detected.

Factory default settings:

0.5 seconds

Double Tap Interval Setting
Select an interval when a double tap is detected.

Factory default settings:

0.5 seconds

This setting is used to disable bypass printing (printing other jobs ahead of a job that has been stopped because the paper required for the job is not available in any of the trays). *

* This does not include cases where the paper ran out during the job.

Factory default settings:

Disable

Set the priority for each job and start printing from the job with the highest priority.

Factory default settings:

All Low

Received Data Image Check Setting:

• File Retrieve of Main Folder/Quick File Folder:
Select whether the default display format of the document filing main folder and temporary folder screens is list or thumbnails.

Factory default settings:

List

• File Retrieve of Custom Folder:
Select whether the default display format of the document filing custom folder screen is list or thumbnails.

Factory default settings:

List

• File Retrieve of Direct Print:
Select whether the default state of the folder screen for direct print shows the folders as a list or as thumbnails.

Factory default settings:

List

Configure settings required for remote operation of the machine from a PC connected to the same network.
Remote Software Operation

• Operational Authority:
This is used when remote software is used to operate the machine remotely.

• View Password Entry Screen:
When operating the machine by remote control using the remote software, the password entry screen will appear on both the computer and the machine, or on only the computer.

Factory default settings:

Operational Authority: Prohibited, View Password Entry Screen: Display in Both PC and Machine

Operation from Specified PC

• Operational Authority:
This is used to allow remote operation of the machine using the specified PC.

• Hostname or IP Address of PC:
Enter the host name or IP address of the PC to be connected to the machine.

• View Password Entry Screen:
When operating the machine by remote control using the remote software, the password entry screen will appear on both the computer and the machine, or on only the computer.

Factory default settings:

Operational Authority: Prohibited, View Password Entry Screen: Display in Both PC and Machine

Operation by User who Has Password

• Operational Authority:
This is used to allow a user who has a password to operate the machine remotely. For information on the password, consult your service technician.

• View Password Entry Screen:
When operating the machine by remote control using the remote software, the password entry screen will appear on both the computer and the machine, or on only the computer.

Factory default settings:

Operational Authority: Prohibited, View Password Entry Screen:Display in Both PC and Machine

Set whether to print the data list with 1-sided print or 2-sided print.

Factory default settings:

1-sided print

Configure settings for the keyboard used for entry on the text.

Change the key layout and display according to the set language.

Factory default settings:

Varies depending on country and region

When an external keyboard is connected, set whether the external keyboard or the keyboard shown on the touch panel (soft keyboard) is given priority.

Factory default settings:

Soft Keyboard

Register a text that you frequently use when entering an address or domain name in advance.