STORING FAX OPERATIONS (PROGRAM)

This function collectively stores various settings as one program. The stored program can be retrieved using an easy operation.
The following settings can be registered with the program.

Destination setting
Original
Resolution
Exposure
Timer

The settings stored in a program will be retained even after the program is used for transmission. The same settings can be used repeatedly for transmission.
The following contents cannot be stored in programs:

[Speaker] key

Up to 8 programs can be stored.
Up to 100 destinations can be stored in one program.

Place the original.

According to the function stored in the program, place the original in the document feeder tray of the automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS

Tap [Call Program].

Tap the desired program key.

Configure additional settings as required.

Some settings cannot be added depending on the contents of the called program.

Tap the [Start] key to start scanning of the original.

If you inserted the original pages in the document feeder tray, all pages are scanned.
When you place the original on the document glass, scan each page one at a time.
After you have scanned the last original, tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.

STORING FAX OPERATIONS (PROGRAM)

CONTENTS MENU