SHARP

Language

SCANNING AND SENDING ORIGINALS COLLECTIVELY

SCANNING A BUSINESS CARD (BUSINESS CARD SCAN)

You can scan a business card.

Place one business card that you want to scan on the document glass.

DOCUMENT GLASS
Cautions when placing business cards
  • Available business card sizes are 55 x 91 mm.
  • If the shape of a business card is not square or rectangular, the business card may not be cropped correctly.

Specify the destination.

RETRIEVING A DESTINATION FROM AN ADDRESS BOOK
VIEWING A LIST OF THE SELECTED DESTINATIONS
ENTER DESTINATION MANUALLY
RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK
USING A TRANSMISSION LOG TO RESEND

Tap the [Others] key, and tap the [Bus. Card Scan] key.

Tap the [On] key, and change settings as needed.

When you have completed the settings, tap .
To cancel the business card scan setting
Tap the [Off] key.

Tap the [Colour Start] or [B/W Start] key to start scanning the originals.

When scanning is completed, place the next group of originals and tap the [Colour Start] or [B/W Start] key.
Repeat the above step until you have scanned all originals, and then tap the [Read-End] key.
When transmission is completed, a beep sounds.
  • When the Business Card Scan setting is cancelled, the following items retain the setting changes that occurred when Business Card Scan was enabled. Resolution, File Type
  • Depending on the business card, it may not be extracted to the file correctly.

CONTENTS MENU

Language

BP-C131WD
User's Manual

Version 02a / bpc131wd_usr_02a_en