SHARP

Language

Copy Settings

The following settings are related to copying.
This setting requires administrator privileges.

This setting can only be set on the operation panel.

ID Card Copy Setting

Select an image layout.

Factory default settings:
Set Vertically

Card Shot Settings

This is used to set the default original size for the card shot function.
Specify a value from 25 mm (1") to 216 mm (8-1/2") in increments of 1 mm (1/8") for both the X (horizontal) and Y (vertical) dimensions of the original.

Factory default settings:
Original Size:X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")

Original Size Settings

Specify the standard value of the original size to be used for copying.

Factory default settings:
A4 (8-1/2" x 11")

Default Tray Set

Specify the paper tray that will be initially selected for copying.

Factory default settings:
Tray 1

Auto Selects the Paper Tray that was Last Replenished

When this setting is enabled and paper is loaded into a tray while the machine is on standby in copy mode, that tray is automatically selected.

Factory default settings:
Disable

Disabling of Auto Paper Selection

Disables the Auto Paper Selection function.
When this setting is enabled, automatic selection of paper that is the same size as the original on the document glass or in the automatic document feeder does not take place.

Factory default settings:
Disable

Original Image Type/Exposure Settings

Configure default Original Image Type/Exposure settings.

Factory default settings:
Original Image Type: Text/Prtd.Photo, Exposure: Auto

Sort/Group Setting

Configure default Sort/Group settings.

Factory default settings:
Auto

Select Magnification Automatically According to Paper Size

The magnification is automatically selected according to the paper tray size.

Factory default settings:
Disabled

Setting a Maximum Number of Copies

This is used to set the maximum number that can be entered for the number of copies (number of continuous copies). Select from “99” and “999”.

Factory default settings:
999

Scan Resolution Setting

Specify a standard resolution for scanning copies.

Factory default settings:
Colour: Document Feeder: 600x300dpi, Document Glass: 600x400dpi, B/W: Document Feeder: 600x300dpi, Document Glass: 600x400dpi

Language

BP-C131WD
User's Manual

Version 02a / bpc131wd_usr_02a_en