Photointerrupter Lineup  PDF(796KB) download
BACK - NEXT
Photointerrupters
<Reflective type> OPIC Output <With 3-pin connector terminal>

“OPIC” (Optical IC) is a trademark of SHARP Corporation. An OPIC consists of a light-detecting element and signal-processing circuit integrated onto a single chip.
(Ta = 25°C)

☆New product
Model No.
Internal
connection
diagram
Features
Optimum detecting
distance
(mm)
Electro-optical characteristics
Supply voltage
VCC
(V)
Dissipation current
Low level output voltage
ICC
(mA)
MAX.
VCC
(V)
VOL
(V)
MAX.
VCC
(V)
MIN.
MAX.
(Following
diagram [A])
Multiple types of paper detectable, light modulation type,
with connector, sensitivity adjusted
5 to 15
4.75
5.25
30*1
5
0.4
5
Applicable to inverter fluorescent lamp,
light modulation type, with connector, sensitivity adjusted
5 to 15
4.75
5.25
30*1
5
0.4
5
GP2A250LCS0F
Static electricity resistant,
applicable to inverter fluorescent lamp,
light modulation type, with connector, sensitivity adjusted
2.5 to 12.5
4.75
5.25
30*1
5
0.4
5
☆GP2A451LCS0F
(Following
diagram [D])
Compact,screw-clamp type,
Applicable to inverter fluorescent lamp,
Light modulation type, with connector, 3.3 to 5.0V Operation
2.5 to 12.5
3.0
5.50
10*1
3.3 to 5
0.4
3.3 to 5
(Following
diagram [A])
Multiple types of paper detectable, light modulation type,
with connector, sensitivity adjusted
3 to 7
4.75
5.25
30*1
5
0.4
5
(Following
diagram [B])
Compact, screw-clamp type, multiple types of paper
detectable, light modulation type, with connector
3 to 7
4.75
5.25
20*1
5
0.4
5
Compact, hook type, multiple types of paper detectable,
light modulation type, with connector
GP2A430LCS0F
(Following
diagram [C])
Compact, screw-clamp type, multiple types of paper
detectable, light modulation type, with connector,
3.3 to 5V Operation, Low power comsumption
3.0
5.5
10*1
3.3 to 5
0.4
3.3 to 5
GP2A430LCSAF
Compact, hook type, multiple types of paper detectable,
light modulation type, with connector,
3.3 to 5V Operation, Low power comsumption
☆GP2A431LCSAF
(Following
diagram [A])
Multiple types of paper detectable, light modulation type,
sensitivity adjusted, improved light-resistance characteristic for inverter lighting, built-in visible light cut filter
3 to 7
4.75
5.25
30*1
5
0.4
5
Multiple types of paper detectable, light modulation type,
with connector, sensitivity adjusted
3 to 7
4.75
5.25
30*1
5
0.4
5
Multiple types of paper detectable, light modulation type,
with connector, sensitivity adjusted, hook type
3 to 7
4.75
5.25
30*1
5
0.4
5

Note: Topr: –10 to +60°C (GP2A25J0000F, etc.)
–10 to +70°C (GP2A200LCS0F, GP2A240LCS0F, GP2A250LCS0F, GP2A230LRS0F, GP2A230LRSAF, GP2A430LCS0F, GP2A430LCSAF,
GP2A431LCSAF)
–10 to +85°C (GP2A451LCS0F)

*1 Smoothing value RL = ∞
[Internal connection diagram]
[A]
 
GP2A25J0000F
(GP2A25NJJ00F, GP2A200LCS0F,
GP2A240LCS0F)
GP2A250LCS0F
[B]
GP2A25DJ000F
GP2A230LRS0F
(GP2A430LCS0F, GP2A451LCS0F)
[C]
GP2A230LRSAF
(GP2A430LCSAF, GP2A431LCSAF)
GP2A28AJ000F
[D]
※Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the EU RoHS Directive*. For details, please contact SHARP.
*EU RoHS Directive: EU legislation restricting the use of lead, cadmium, hexavalent chromium, mercury, specific brominated flame retardants (PBB and PBDE), and phthalates (DEHP, BBP, DBP, DIBP).
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.