SCANNING AND SENDING AN ORIGINAL AS SEPARATE PAGES

SCANNING AN ORIGINAL AS TWO SEPARATE PAGES (DUAL PAGE SCAN)

The left and right sides of an original are scanned as two separate pages. This function is useful when you wish to successively scan each page of a book or other bound document.
When using dual page scan, the original must be placed on the document glass.

Original scan size	Transmitted image
11" x 17" (A3) x 1 page	8-1/2" x 11"(A4) x 2 pages

This function is available when the original size setting is set to [Auto].
Note that "Center Erase" and "Edge+Center Erase" cannot be used.

Place the original on the document glass.

DOCUMENT GLASS

Tap the mode display to switch to the initial screen of each mode.

CHANGING MODES

Specify the destination.

RETRIEVING A DESTINATION FROM AN ADDRESS BOOK
VIEWING A LIST OF THE SELECTED DESTINATIONS
USING A SEARCH NUMBER TO RETRIEVE A DESTINATION
ENTERING AN ADDRESS MANUALLY
SPECIFYING A NETWORK FOLDER
RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK
USING A TRANSMISSION LOG TO RESEND

Tap the [Others] key, and tap the [Dual Page Scan] key.

A checkmark appears on the icon. After the settings are completed, tap the [Back] key.

To cancel the dual page scan setting
Tap the [Dual Page Scan] key to uncheck it.

Tap the [Start] key to start scanning of the original.

When scanning finishes, place the next original and tap the [Start] key.
Repeat until all pages have been scanned and then tap the [Read-End] key.
A beep will sound to indicate that transmission has ended.

SPLITTING A PAMPHLET BY PAGE AND TRANSMITTING THE PAGES SUCCESSIVELY (BOOK DIVIDE)

The opened pages of a saddle-stitch pamphlet are split by page according to actual page order before transmission.
When using this function, you do not need to sort the original pages to be sent.

This function can be enabled when the original size setting is set to [Auto].

The document glass is not available for this function.

Book Divide is not possible when "Settings (administrator)" - [System Settings] → [Common Settings] → [Device Control] → [Condition Settings] or [Enable/Disable Settings] → [Disabling of Document Feeder] is enabled.

Place the original in the document feeder tray of the automatic document feeder.

AUTOMATIC DOCUMENT FEEDER

Tap the mode display to switch to the initial screen of each mode.

CHANGING MODES

Specify the destination.

Tap the [Others] key, and tap the [Book Divide] key.

Select the binding edge of the pamphlet original. After the settings are completed, tap and [Back] keys in sequence.

Check the preview image displayed in the screen, and make sure that the binding edge is correct.

To cancel the Book Divide setting:
Tap the [Off] key.

Tap the [Start] key to start scanning of the original.

A beep will sound to indicate that scanning and transmission have ended.

SCANNING AND SENDING AN ORIGINAL AS SEPARATE PAGES

SCANNING AN ORIGINAL AS TWO SEPARATE PAGES (DUAL PAGE SCAN)

SPLITTING A PAMPHLET BY PAGE AND TRANSMITTING THE PAGES SUCCESSIVELY (BOOK DIVIDE)

CONTENTS MENU