This function copies multiple
original pages onto a single sheet of paper in a uniform layout.
Select 2-Up to copy two original pages onto one sheet, 4-Up
to copy four original pages onto one sheet, or 8-Up to copy eight
original pages onto one sheet.
This function is convenient when you wish to present multiple
pages in a compact format, or show a view of all pages in a document.
| 2-Up copying |
4-Up copying |
|
|
|
When inserting a cover sheet, select Cover Setting
to copy only a front sheet to one page and collectively copy the
second and subsequent pages.
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
- When using
the document glass to scan multiple original pages, change the original
and tap the [Start] key.
- In Normal
mode, go to step 4.
Tap the [N-Up] key.
COPY MODE
Tap the number of originals you want to copy collectively,
and select the layout key.
If needed, the images will be rotated.
If you have finished selecting settings, go to step 7.
To select more detailed settings, tap the [Detail]
key to switch to normal mode.
EASY MODETap the [Others] key, and tap the [N-Up] key.
Tap [Border], and select the border.
A line can be inserted between pages arranged on a sheet.
After the settings are completed, tap [OK] key.
- To
cancel the N-Up setting:
Tap the
[Off] key.
- To cancel
all settings:
Tap the
[CA] key.
Tap the [Start] key to start copying.
This function copies the front and reverse
sides of a card on one sheet, not on separate sheets.
This function is convenient for making copies for identification
purposes and helps save paper.
Select the paper to be used for card shot.
Set a paper by referring to the "
SELECTING THE PAPER TRAY FOR COPYING".
Tap the [Detail] key to change to normal mode.
EASY MODETap the [Others] key, and tap the [Card Shot] key.
Tap the [On] key, and specify the original size
as required.
After the settings are completed, tap [OK] and
[Back] keys in sequence.
- Tap the areas displaying
width and height sizes respectively, and enter the sizes using the
numeric keys.
- If the image is missing,
enter a slightly larger size.
- To quickly set the size, first specify
a value close to the desired ratio value by the numeric keys, then
adjust it by tapping
.
- When you set the [Adjust to Paper Size] checkbox
to
, the original is enlarged or reduced
with the ratio appropriate to the original size.
To
cancel the Card Shot settings:
Tap the [Off] key.
Place a card face down on the document glass, and tap the
[Start] key.
DOCUMENT GLASS
If the image is missing, shift the original inward
and set it.
Place a card face up on the document glass, and tap the [Start]
key to scan the reverse side.
- Copy settings cannot
be changed when scanning additional pages.
- To cancel
all settings:
Tap the
[CA] key.
Tap the [Read-End] key to start copying.
This function copies multiple same original images on one sheet.
You can set any of the following three types of repeat copy.
| Repeat method |
Description |
|
Auto Repeat
|
The maximum repeat count to copy images on a sheet
is calculated automatically according to the original size, paper
size, and copy ratio being selected from the base screen.
|
|
Fixed Repeat
|
When you select a repeat count, original size,
and paper size to copy images on a sheet, the copy ratio is calculated
automatically and the original is copied.
|
|
Photo Repeat
|
This function repeatedly copies on A4 (8-1/2" x 11")
papers without changing the copy ratio of the photo size original.
You can select any of the following five types of original size:
E/L Size, Postcard (Up to 148 mm x 105 mm (3" x
5"))
Up to 100 mm x 150 mm (5" x 7")
Card (Up to 70 mm x 100 mm (2-1/2" x 4"))
ID Photo (Up to 65 mm x 70 mm (2-1/2" x 2-1/2"))
Card (Up to 57 mm x 100 mm (2-1/8" x 2-5/8"))
* Reduction will be 95%.
|
- Repeat Layout cannot
be selected in easy mode.
- Repeat Layout must be specified
before scanning the original.
- If the copy ratio automatically
obtained in [Fixed Repeat] exceeds 25 to 400% (using document glass)
or 25 to 200% (using automatic document feeder), it will result
in an error. Select the number of faces to repeat again.
- Always place an original
on the document glass for photo repeating.
- Repeat Layout can be combined
with Staple.
- This function cannot
be combined with Mixed Size Original or 2-Sided Copy.
- Photo Repeat cannot be combined
with Image Orientation.
Copy by automatically calculating the
repeat count (Auto Repeat)
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASSTap the [Detail] key to change to normal mode.
EASY MODETap the [Others] key, and then tap the [Repeat Layout]
key.
Tap the [Auto Repeat] key.
Check the repeat faces which have been calculated automatically.
Change the original size, paper size, or copy ratio by
tapping the respective [Original], [Paper Select], or [Copy Ratio]
key when necessary.
SELECTING THE ORIENTATION AND
SIZE OF THE ORIGINALMANUAL RATIO SELECTIONSELECTING THE PAPER TRAY FOR COPYING
Set so that there are one or more repeat faces.
Tap the [Layout] key.
Tap the [Layout w/o spacing] key or the [Layout evenly spaced] key, and
then tap the [OK] key.
Specify the repeat partition line.
After the settings are completed, tap [OK] key.
- To
cancel the Auto Repeat setting:
Tap the
[Off] key.
- To cancel
all settings:
Tap the
[CA] key.
Tap the [Start] key to start copying.
Copy by specifying a repeat count (Fixed Repeat)
Perform steps 1 to 3 in
Copy by automatically calculating the
repeat count (Auto Repeat).
Tap the [Fixed Repeat] key.
Tap the [Original] and [Paper Select] keys to select
an original size and a paper size, respectively.
SELECTING THE ORIENTATION AND
SIZE OF THE ORIGINALSELECTING THE PAPER TRAY FOR COPYINGTap [No. of Faces] to set a repeat count.
After the settings are completed, tap [OK] key.
The automatic calculation result is shown as the copy
ratio.
If the calculated copy ratio exceeds the range
from 25% to 400% (using document glass) or 25 to 200% (using automatic document
feeder), an error occurs.
Tap the [Layout] key.
Tap the [Layout w/o spacing] key or the [Layout evenly spaced] key, and
then tap the [OK] key.
Specify the repeat partition line.
After the settings are completed, tap [OK] key.
- To
cancel the fixed repeat setting:
Tap the
[Off] key.
- To cancel
all settings:
Tap the
[CA] key.
Tap the [Start] key to start copying.
Repeat a photo size original in actual size (Photo Repeat)
Perform steps 1 to 3 in
Copy by automatically calculating the
repeat count (Auto Repeat).
Tap the [Photo Repeat] key.
Place the original on the document glass.
Tap the [Original] key and select an original size.
When you tap the original size key, the original direction
is indicated in the "How To Set". Place the original to meet the displayed
orientation.
After the settings are completed, tap [OK] key.
The automatic calculation result is shown as the copy
ratio.
When you tap the [*Up to 57x100mm(Card) *~ 2 1/8 x 2 5/8"] key on the [Original]
screen, you can select the A4 paper size only.
- To
cancel the photo repeat setting:
Tap the
[Off] key.
- To cancel
all settings:
Tap the
[CA] key.
Tap the [Start] key to start copying.
Business Card Copy can be used to copy up
to 8 business cards on one sheet of paper.
This function can be used when you want to create the list
of business cards, and when you want to file business cards.
1-Sheet Layout, 2-Sheet Layout,
8-Sheet Layout
- Business
Card Copy cannot be selected in easy mode.
- In BP-B537WR,
business cards cannot be two-sided scanned with the automatic document
feeder.
Tap the [Detail] key to change to normal mode.
EASY MODEPlace a business card, and select the paper
to be used to copy the card.
Refer to "
SELECTING THE PAPER TRAY FOR COPYING" to select
the paper.
Tap the [Others] key, and then tap the [Business Card Copy]
key.
Specify settings for Business Card Copy.
- Specify the number of business cards to be copied
and touch the [1-Sheet Layout] key or the [2-Sheet Layout] or the [8-Sheet Layout]
key.
- When [8-Sheet Layout] is selected, select the desired layout
from "Layout".
After the settings are completed, tap [OK] and
[Back] keys in sequence.
- To
cancel the business card copy setting:
Tap the
[Off] key.
- To cancel
all settings:
Tap the
[CA] key.
Tap the [Start] key to start copying.
The zoom is fixed
at 100%.
Copy results of 8-Sheet Layouts
| Originals (Original orientation) |
Settings |
Results |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BEFORE USING THE MACHINE
OPERATION OF THE MACHINE
COPIER
PRINTER
FACSIMILE
SCANNER/INTERNET FAX
DOCUMENT FILING
CONVENIENT USE OF THE MACHINE
SETTING MODE
TROUBLESHOOTING
APPENDIX
_card(dspf).png)
_card.png)
