SHARP

Language

COPY MODE

There are two modes for copying: easy mode and normal mode.
Easy mode is limited to frequently used functions that allow you to smoothly perform most copy jobs.
If you need to select detailed settings or special functions, use normal mode. All functions can be used in normal mode.

EASY MODE

Easy mode makes it easy to select basic settings for copying.
1st screen

-+

2nd screen

-+
Show the size of the placed original.
Reset all settings.
Scans the original and shows a preview image.
Enter the number of copies.
Recently used job setting can be loaded.
Starts copying.
Change the function display.
Select function to be set up.
Change to normal mode.

The following features can be set in easy mode.

  • To select a function in easy mode
  • In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Easy Mode Settings] → [Easy Copy].
  • To cancel the warning message displayed when switching from easy mode to normal mode
  • In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Easy Mode Settings] → [Display a Confirmation Message when Selecting "Detail" in Easy Modes] to disable this setting.

NORMAL MODE

SELECTING COPY MODE

Language

BP-B537WR/BP-B547WD
User's Manual

Version 03a / bpb547wd_usr_03a_en