■Dust Sensor Unit
(Ta = 25°C)
Model No.
Features
Topr
(°C)
Operating
supply voltage (V)
Electro-optical characteristics
Dissipation
current
(mA)
Reference
Detection concentration
µg/m3 (TYP.)(*)
Sensitivity
Output
•Built-in infrared emitting diode, photodiode and signal processing circuit
•Compact, single-shot detection of house dust
•Output: Analog voltage
–10 to +65
4.5 to 5.5
TYP. 11
0 to 1 500
0.5±0.15 V/
(0.1 mg/m3)
Precision ±30%
Analog voltage
GP2Y1012AU0F
•High sensitivity
•Built-in infrared emitting diode, photodiode and signal processing circuit
•Compact, single-shot detection of house dust
•Output: Analog voltage
0 to 750
1.0±0.15 V/
(0.1 mg/m3)
Precision ±15%
Analog voltage
GP2Y1014AU0F
•High precision
•Built-in infrared emitting diode, photodiode and signal processing circuit
•Compact, single-shot detection of house dust
•Output: Analog voltage
0 to 1 500
0.5±0.075 V/
(0.1 mg/m3)
Precision ±15%
Analog voltage
GP2Y1023AU0F
•High sensitivity
•Built-in microcomputer
•Built-in infrared emitting diode, photodiode and signal processing circuit
•Compact, single-shot detection of house dust
•Output: Digital signal output (PWM)
4.75 to 5.25
TYP. 15
0 to 750
1.4±0.21 ms/
(0.1 mg/m3)
Precision ±15%
Digital signal (PWM)
Temperature correction
Averaging
GP2Y1026AU0F
•High concentration
•Built-in microcomputer
•Built-in infrared emitting diode, photodiode and signal processing circuit
•Compact, single-shot detection of house dust
•Output: Digital signal output (UART)
0 to 2 100
0.35±0.06 V/
(0.1 mg/m3)
Precision ±15%
Digital signal (UART)
Temperature correction
Averaging
GP2Y1030AU0F
•Built-in microcomputer
•Built-in infrared emitting diode, photodiode and signal processing circuit
•Compact, single-shot detection of house dust
•Discriminated detection, PM2.5 or larger, is possible
•Internal cleaning possible
4.5 to 5.5
TYP. 27
0 to 500
Precision ±15%
Digital signal (UART)
(*) Based on the TSI 8530 standard

GP2Y1010AU0F
(GP2Y1012AU0F, GP2Y1014AU0F, GP2Y1023AU0F, GP2Y1026AU0F)
GP2Y1030AU0F
■PM Sensor Unit
(Ta = 25°C)
Model No.
Features
Topr
(°C)
Operating
supply voltage (V)
Electro-optical characteristics
Dissipation
current
(mA)
Reference
Detection concentration
µg/m3 (TYP.)(*)
Sensitivity
Output
GP2Y1040AU0F
•Built-in VCSEL for high sensitivity and high accuracy
•Detectable PM1.0/PM2.5/PM10 separately
•Built-in high reliability fan
•Equipped with auto cleaning mode function
–10 to +60
4.5 to 5.5
TYP. 50
0 to 1 000
Precision ±10µg
(0-100µg/m3)
Precision ±10%
(0-500µg/m3)
Diginal siganal
(UART and I2C)

GP2Y1040AU0F
※Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the EU RoHS Directive*. For details, please contact SHARP.
*EU RoHS Directive: EU legislation restricting the use of lead, cadmium, hexavalent chromium, mercury, specific brominated flame retardants (PBB and PBDE), and phthalates (DEHP, BBP, DBP, DIBP).
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.